Printable version of Entry

Click here to view this entry in its original format

McMark's Blog

Installed New CVs

I busted my CV that had been warning me of imminent failure for awhile. It was an un-eventful failure and didn't cause any other damage.

I had new CVs from Eric Shea on the shelf ready to install. It took me a few weeks to get around to doing the work, but the new CVs are now installed (what a PITA job) and tested. No performance improvement obviously, but it's back on the road and those should give me any problems for a good long while. I'm very happy with the kit.

I also installed the 19 mm Weltmeister sway bar that I got from Mike Mueller and adjusted the ride height in the front so the car is level.

I almost went so far as to install the new ball joints and turbo tie rods I have waiting, but I can't keep my car in the shop that long. Customer projects demand attention! wink.gif

I removed the 914Club banner awhile back. happy11.gif


Attached thumbnail(s)
Attached Image

Powered by Invision Community Blog (http://www.invisionblog.com)
© Invision Power Services (http://www.invisionpower.com)