Printable version of Entry

Did a bunch of work tonight, but didn't have the camera with me.

Here's what I did:

• Installed new/used steering wheel
• Removed rusty (and crunchy) pedal cluster and installed the cluster I rebuilt with bronze bushings and POR15'd
• Installed brand new accelerator pedal
• Installed window cranks
• Transfered title into my name
• Removed front license plate
• Got new plates from the DMV
• Insured
• Tightened left front wheel bearing
• Adjusted the slack out of the throttle cable

Somethings that I found while poking around:

• E-brake is a mess, but I know why. Only the right-rear pads were replaced.
• Engine lid cable is gone, have replacement
• Tie-rods ends are shot, need to replace with the turbo tie-rods kit that I have on my shelf
• Need to install optima battery (on shelf)
• Gauge plate rusty, need to replace
• Wiper arms need repainting/powdercoating
• Small dent (no creases) in bumper that I'd like to pull/push out
• Battery not secure
• ECU not mounted, but there's no mount as this car was converted from a 1.8 with L-Jet to a 2.0 with D-jet. Will have to fab a mount.
• Clutch pedal cable is newish, but needs adjusting

Some more photos: