IPB WARNING [2] Creating default object from empty value (Line: 113 of \modules\blog\rss.php)
Sat, 30 May 2026 20:20:14 +0000 notification@914world.com (914World.com) Invision Community Blog 60
with the seat back:


with the seat pulled up - all three components:


drilled straight through the indent in the firewall and added a rubber grommet:


engine installed




the brass 90 deg elbow for the vacuum line.
]]> Sun, 13 Feb 2011 19:33:21 +0000 ]]> Sun, 11 Mar 2007 13:12:11 +0000 ]]> Sat, 12 Aug 2006 02:14:44 +0000
forgot about the weltmeister swaybar in front and Koni Reds in the rear - 180 lb springs...
and MSD 6A ignition mounted in rear trunk....

and new battery tray and battery....

]]> Mon, 17 Jul 2006 00:36:09 +0000
1974 CA car
Solid metal everywhere
New engine shelf metal
Rebuilt 2.0 built to L specs (early E spec)
External oil cooler in right rear flare/fender
FG flares attached via dzus fasteners
5 bolt suspension
M calipers in front and rear, vented disks in rear, 19mm MC
15x8's on all 4 corners
Very nice interior - almost perfect dash, Perfect stock seats
Good glass and almost new rubber on all seals
FG bumpers, LE front air dam
Hood struts on both trunks

Too much garage dust in some of these pictures!
]]> Sun, 16 Jul 2006 23:43:59 +0000