Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

2 Pages V < 1 2  
 Reply to this topicStart new topic
> BLING! New 944/911 Axles, done and ready to be installed ...
gms
post Aug 16 2016, 05:28 PM
Post #21


Advanced Member
****

Group: Members
Posts: 2,695
Joined: 12-March 04
From: Chicagoland
Member No.: 1,785
Region Association: Upper MidWest
QUOTE(SirAndy @ Aug 25 2006, 10:44 PM) *

915 output flanges and 911 stub axle came from a mid to late '70s 911 (~'75 - '79) and the hubs came from a early 911 (~'69 - '73?) ...

FYI
Last time I was by Garold Shaffer's house he had about 20- 110mm 915 output flanges and 911 stub axles
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
barrym
post Aug 17 2016, 01:54 AM
Post #22


Member
**

Group: Members
Posts: 88
Joined: 12-October 14
From: Australia
Member No.: 18,008
Region Association: None
thanks - am specifically interested in the outboard side - the setup I have on the shelf is 110 mm (I think) stub axle.
I have one of these on the shelf too of which the CV joint fits the stub axle ...
my plan was to have made an axle with 911 on one end and suby DOJ on the inside.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cracker
post Aug 17 2016, 05:43 AM
Post #23


Advanced Member
****

Group: Members
Posts: 2,148
Joined: 2-February 10
From: Atlanta (area)
Member No.: 11,316
Region Association: South East States
...you probably have a 108mm CV on the outside. You will need the 5-lug early 911 hub as previously mentioned as well.

Tony

QUOTE(barrym @ Aug 17 2016, 03:54 AM) *

thanks - am specifically interested in the outboard side - the setup I have on the shelf is 110 mm (I think) stub axle.
I have one of these on the shelf too of which the CV joint fits the stub axle ...
my plan was to have made an axle with 911 on one end and suby DOJ on the inside.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
wndsnd
post Aug 17 2016, 06:48 PM
Post #24


You wanted a horse, but got a goat. Nobody wants a goat....
****

Group: Members
Posts: 2,861
Joined: 12-February 12
From: North Shore, MA
Member No.: 14,124
Region Association: North East States
Andy, what did you do with your rear brakes?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mgp4591
post Aug 17 2016, 08:08 PM
Post #25


914 Guru
*****

Group: Members
Posts: 5,384
Joined: 1-August 12
From: Salt Lake City Ut
Member No.: 14,748
Region Association: Intermountain Region
QUOTE(barrym @ Aug 17 2016, 01:54 AM) *

thanks - am specifically interested in the outboard side - the setup I have on the shelf is 110 mm (I think) stub axle.
I have one of these on the shelf too of which the CV joint fits the stub axle ...
my plan was to have made an axle with 911 on one end and suby DOJ on the inside.

Me too - I'll be following this thread with great interest!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cali914
post Aug 17 2016, 10:05 PM
Post #26


cali914
**

Group: Members
Posts: 447
Joined: 26-April 06
From: Berkeley Ca.
Member No.: 5,934
Region Association: Northern California
QUOTE(SirAndy @ Aug 25 2006, 06:44 PM) *

it's been a while since i started this project. i had all the parts, but i was waiting for the right time to redo the complete rear suspension ...

yesterday, i went up to McMark's and we took out the old trailing arms and axles and shocks and prepared my new trailing arms and the axles.

McMark finished the job today, and now i have:

- new (unbend) trailing arms
- new mueller roller bearings
- new koni adjustable shocks
- new axles with brand new 944 CVs

(IMG:style_emoticons/default/smilie_pokal.gif) Andy

PS: for the axles, i used, tranny to wheel:

915 (911, '75 - '79) coarse spline 6-bolt 100mm outputshafts ->
944 100mm CV ->
modified 914 axle shaft ->
944 100mm CV ->
911 ('75 - '79) 6-bolt 100mm stub axle ->
911 ('69 - '73?) hub
= real 5-lug!


on top, the stock 914 axle, bottom, the new axle using 944 and 911 parts:




and installed:



Andy do you have a 901 or 915 I did that conversion and finding the 911 stub axle which slides right into the 901 was difficult. HC
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Aug 18 2016, 01:03 PM
Post #27


Resident German
*************************

Group: Admin
Posts: 41,688
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE(wndsnd @ Aug 17 2016, 05:48 PM) *
Andy, what did you do with your rear brakes?

I went with vented rotors and Boxster brakes, neither of which has anything to do with the axles ...
(IMG:style_emoticons/default/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Aug 18 2016, 01:04 PM
Post #28


Resident German
*************************

Group: Admin
Posts: 41,688
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE(cali914 @ Aug 17 2016, 09:05 PM) *
Andy do you have a 901 or 915 I did that conversion and finding the 911 stub axle which slides right into the 901 was difficult. HC

Stock 901, the coarse stub axles are somewhat rare but not impossible to find.
(IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
barrym
post Aug 20 2016, 01:20 AM
Post #29


Member
**

Group: Members
Posts: 88
Joined: 12-October 14
From: Australia
Member No.: 18,008
Region Association: None
QUOTE(Reverend Troublemaker @ Aug 17 2016, 09:43 PM) *

...you probably have a 108mm CV on the outside. You will need the 5-lug early 911 hub as previously mentioned as well.

Tony

QUOTE(barrym @ Aug 17 2016, 03:54 AM) *

thanks - am specifically interested in the outboard side - the setup I have on the shelf is 110 mm (I think) stub axle.
I have one of these on the shelf too of which the CV joint fits the stub axle ...
my plan was to have made an axle with 911 on one end and suby DOJ on the inside.



yep - I have the matching pair of suspension arm hubs, including the 5mm spacer required from Patrick motorsports.
I bought a single 930 turbo axle - has the same CV's as far as I can tell on either side (inner and outer).
I pressed off the cv joints (didn't need much pressure) from the shaft and have bolted them up to the inner side of the hub - all seems to fit ok ...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
wndsnd
post Aug 20 2016, 02:46 PM
Post #30


You wanted a horse, but got a goat. Nobody wants a goat....
****

Group: Members
Posts: 2,861
Joined: 12-February 12
From: North Shore, MA
Member No.: 14,124
Region Association: North East States
QUOTE(SirAndy @ Aug 18 2016, 03:03 PM) *

QUOTE(wndsnd @ Aug 17 2016, 05:48 PM) *
Andy, what did you do with your rear brakes?

I went with vented rotors and Boxster brakes, neither of which has anything to do with the axles ...
(IMG:style_emoticons/default/biggrin.gif)



Sorry.

Thinking ahead...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

2 Pages V < 1 2
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 16th June 2024 - 07:58 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...