|
|

|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
![]() ![]() |
| r_towle |
Sep 27 2018, 07:26 AM
Post
#21
|
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
I think it’s a great idea!
Look at the 550 type loevers in the fender, those would be perfect, and age appropriate to let air in. |
| PanelBilly |
Sep 27 2018, 11:34 AM
Post
#22
|
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,998 Joined: 23-July 06 From: Kent, Wa Member No.: 6,488 Region Association: Pacific Northwest
|
How about a scoop that pulls air from under the car and directs it up? First I’d see if it meets you needs the way it is. Looks like a clean installation to me.
|
| amfab |
Jan 31 2019, 09:54 PM
Post
#23
|
|
Member ![]() ![]() Group: Members Posts: 401 Joined: 17-May 16 From: Los Angeles Member No.: 20,004 Region Association: None
|
Hi Perry, I was wondering if you have an update regarding the effectiveness of the cooler in this location/configuration.
Thanks -Andrew |
| IronHillRestorations |
Feb 21 2022, 09:06 AM
Post
#24
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
I just finished plumbing the cooler, thermostat, and return line to the tank, as well as wiring the relay for the fan. It’ll probably be a month or so before the engine gets installed. Here’s some follow up photos of the install.
Oil lines fabricated and fitted. Isolation mounts not installed yet. Oil lines to thermostat, not yet secured |
| IronHillRestorations |
Feb 21 2022, 09:13 AM
Post
#25
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| IronHillRestorations |
Feb 21 2022, 09:23 AM
Post
#26
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| IronHillRestorations |
Feb 21 2022, 09:27 AM
Post
#27
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| IronHillRestorations |
Feb 21 2022, 09:34 AM
Post
#28
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| IronHillRestorations |
Feb 21 2022, 09:39 AM
Post
#29
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
As far as the efficacy, I have no doubt this is sufficient. I did the same type of install for a 3.0 conversion using a smaller cooler 27 years ago and it worked very well. This cooler is probably 20-30% larger.
|
| IronHillRestorations |
Feb 22 2022, 12:18 PM
Post
#30
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| IronHillRestorations |
Feb 22 2022, 12:32 PM
Post
#31
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
|
| ClayPerrine |
Feb 22 2022, 02:29 PM
Post
#32
|
|
Life's been good to me so far..... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,568 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille
|
|
| Tdskip |
Feb 22 2022, 03:52 PM
Post
#33
|
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,784 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None
|
|
| IronHillRestorations |
Feb 22 2022, 06:30 PM
Post
#34
|
|
I. I. R. C. ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,959 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None
|
This is getting a fully rebuilt EFI engine, which is going to run cooler than a 60k mile engine. It’s also got a double grill engine lid (and a stock one too) plus the cooler is a bit oversized, so I’m confident the cooler alone could be enough, but the fan is insurance. In the discussions with the owner, I told him I would add another cooler/fan setup under the rear trunk before going to a front cooler.
It’s an occasional use street hot rod. I don’t think it will see much use on really warm days either. |
| aturboman |
Feb 23 2022, 04:35 PM
Post
#35
|
|
Member ![]() ![]() Group: Members Posts: 176 Joined: 18-October 11 From: CA Member No.: 13,687 Region Association: None |
This is a 73 911 RS cooler I installed in the rear trailing part of the LR qtr.
Great for a street car, no running lines up front. It fits so well its almost like it was meant for that application, sadly they are uber expensive now. ![]() |
| horizontally-opposed |
Feb 23 2022, 07:15 PM
Post
#36
|
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,456 Joined: 12-May 04 From: San Francisco Member No.: 2,058 Region Association: None
|
Beautiful work, Perry. Looks great! (IMG:style_emoticons/default/smilie_pokal.gif)
|
| horizontally-opposed |
Feb 23 2022, 07:18 PM
Post
#37
|
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,456 Joined: 12-May 04 From: San Francisco Member No.: 2,058 Region Association: None
|
This is a 73 911 RS cooler I installed in the rear trailing part of the LR qtr. Great for a street car, no running lines up front. It fits so well its almost like it was meant for that application, sadly they are uber expensive now. ![]() What a great idea, running a 911 loop cooler in the rear fender of a 914. Not only no lines going all the ways to the front, but front trunk and spare tire fully preserved. And the late Bruce Anderson was a big fan of the loop-style coolers. If someone needed to, could this be reversed and run another one in the RH rear fender? I wonder if this is an idea for @mb911 ? |
| mb911 |
Feb 23 2022, 07:59 PM
Post
#38
|
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,846 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest
|
This is a 73 911 RS cooler I installed in the rear trailing part of the LR qtr. Great for a street car, no running lines up front. It fits so well its almost like it was meant for that application, sadly they are uber expensive now. ![]() What a great idea, running a 911 loop cooler in the rear fender of a 914. Not only no lines going all the ways to the front, but front trunk and spare tire fully preserved. And the late Bruce Anderson was a big fan of the loop-style coolers. If someone needed to, could this be reversed and run another one in the RH rear fender? I wonder if this is an idea for @mb911 ? Man if I could find a bunch of loop coolers I would make a bunch up. Pretty easy setup. |
| SirAndy |
Feb 23 2022, 08:04 PM
Post
#39
|
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 42,562 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
What a great idea, running a 911 loop cooler in the rear fender of a 914. Not only no lines going all the ways to the front, but front trunk and spare tire fully preserved. And the late Bruce Anderson was a big fan of the loop-style coolers. If someone needed to, could this be reversed and run another one in the RH rear fender? Maybe i'm the only one confused here but how exactly does that clear the rear tires? (IMG:style_emoticons/default/confused24.gif) |
| horizontally-opposed |
Feb 23 2022, 09:04 PM
Post
#40
|
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 3,456 Joined: 12-May 04 From: San Francisco Member No.: 2,058 Region Association: None
|
Maybe i'm the only one confused here but how exactly does that clear the rear tires? (IMG:style_emoticons/default/confused24.gif) Fair question, though it looks like the interference points are above the tire? (IMG:style_emoticons/default/idea.gif) The tightest spot in the rear fenders is often between the inner fender and the tire sidewall? Another photo or two might be illuminating, as this is a pretty extreme angle. On the other hand, could a for-purpose loop cooler for the 914's rear fender extend the hard lines forward, over the top of the tire / close to the top of the inner fender, so that the fittings for the rubber lines are in front of the tires, whether high or low? Would extend the cooling area and shorten the rubber line runs… |
![]() ![]() |
|
Lo-Fi Version | Time is now: 22nd November 2026 - 03:12 PM |
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |