 Paint prep, Burning through to metal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| jeffdon |
 May 29 2010, 01:41 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,094 Joined: 24-October 06 From: oakland, ca Member No.: 7,087 Region Association: None  |
When i burn through to bare metal like on an edge or other high point, is it ok to shoot etching primer onto the bare spot? Just worried it might react badly with adjacent primer
|
   |
 
|
| scotty b |
May 29 2010, 03:55 PM
Post
#2
|
|
rust free you say ? Group: Members Posts: 16,375 Joined: 7-January 05 From: richmond, Va. Member No.: 3,419 Region Association: None |
Technically it would depend on the prodct lines recommendation, but in most cases it would be fine. Assuming you are doing your body work right now, ? most decent paint systems primers are fine on small bare spots without etching first.
|
|
|
|
| jeffdon |
May 29 2010, 04:32 PM
Post
#3
|
|
Senior Member Group: Members Posts: 1,094 Joined: 24-October 06 From: oakland, ca Member No.: 7,087 Region Association: None |
QUOTE(scotty b @ May 29 2010, 02:55 PM)  Technically it would depend on the prodct lines recommendation, but in most cases it would be fine. Assuming you are doing your body work right now, ? most decent paint systems primers are fine on small bare spots without etching first. Tried the etch primer on the bare spots. Seems to be fine. Car is now in what i hope is final coat of primer on all fenders and the back of the car. Will see how it blocks out. Doors should be done tomorrow. With any luck, color and clear next weekend. This things coming off the jack stands yet! For now, its about beer-thirty. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 03:08 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.