Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

2 Pages V  1 2 >  
 Reply to this topicStart new topic
> What is the proper Head Stud extraction tool? - Now to reinstall them.
stugray
post Nov 10 2012, 12:26 AM
Post #1


Advanced Member
****

Group: Members
Posts: 3,825
Joined: 17-September 09
From: Longmont, CO
Member No.: 10,819
Region Association: None
I have tried a couple of methods for removing the head studs from the case.
Double Nut rarely works.
I bought the NAPA stud removal tool, and while it is the perfect tool when you have room, it does not work in such tight areas as our middle head studs.

I looked for all kinds of "stud removal tools", but most of them are for broken studs, not for removing studs without 'munging up' the threads.

What does everyone else use?

A search does not turn up a simple 10mm stud extractor that wont tear up the threads.

Stu
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SLITS
post Nov 10 2012, 06:28 AM
Post #2


"This Utah shit is HARSH!"
**********

Group: Benefactors
Posts: 13,602
Joined: 22-February 04
From: SoCal Mountains ...
Member No.: 1,696
Region Association: None
Collet stud extractor ... about $250 from SnapOn + the inserts for each size bolt.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jon H.
post Nov 10 2012, 06:33 AM
Post #3


Member
**

Group: Members
Posts: 242
Joined: 1-July 11
From: Ottawa, Canada
Member No.: 13,264
Region Association: Canada
A few cheaper options; still Snap-on though

http://buy1.snapon.com/catalog/tools.asp?t...re=snapon-store
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SLITS
post Nov 10 2012, 06:52 AM
Post #4


"This Utah shit is HARSH!"
**********

Group: Benefactors
Posts: 13,602
Joined: 22-February 04
From: SoCal Mountains ...
Member No.: 1,696
Region Association: None
Those will still chew up the studs / ruin the threads.

Collet Stud Extractor Set

I was only $600 off (IMG:style_emoticons/default/sad.gif) (IMG:style_emoticons/default/sad.gif)

though you can purchase the collet holder and then add for the metric stud thread size you want. I've used one for removal and installation (no I don't own one, I borrow it).
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bulitt
post Nov 10 2012, 07:24 AM
Post #5


Achtzylinder
****

Group: Members
Posts: 4,189
Joined: 2-October 11
Member No.: 13,632
Region Association: South East States
Maybe this set from Summit (IMG:style_emoticons/default/confused24.gif)
Metric Stud Remover Set.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bam914
post Nov 10 2012, 07:49 AM
Post #6


Member
**

Group: Members
Posts: 342
Joined: 23-November 03
From: Atlanta, Ga
Member No.: 1,378
Region Association: None
Every time I have done it, which is a lot, I use the double nut method and an impact gun. If they are stubborn I will heat the block up around the stud. There have been only two studs out of over a hundred that I have not been able to get out.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mrbubblehead
post Nov 10 2012, 08:49 AM
Post #7


Twodollardoug
***

Group: Members
Posts: 1,155
Joined: 17-December 10
From: calimesa ca.
Member No.: 12,492
Region Association: Southern California
QUOTE(bam914 @ Nov 10 2012, 06:49 AM) *

Every time I have done it, which is a lot, I use the double nut method and an impact gun. If they are stubborn I will heat the block up around the stud. There have been only two studs out of over a hundred that I have not been able to get out.

(IMG:style_emoticons/default/agree.gif)

two nuts and a mapp torch....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
DBCooper
post Nov 10 2012, 10:46 AM
Post #8


14's in the 13's with ATTITUDE
****

Group: Members
Posts: 3,079
Joined: 25-August 04
From: Dazed and Confused
Member No.: 2,618
Region Association: Northern California
Heat and an impact wrench.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post Nov 10 2012, 10:52 AM
Post #9


914 Freak!
***************

Group: Retired Admin
Posts: 20,180
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
(IMG:style_emoticons/default/agree.gif) No special tools needed.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
patssle
post Nov 10 2012, 10:55 AM
Post #10


Senior Member
***

Group: Members
Posts: 981
Joined: 28-August 09
From: Houston, TX
Member No.: 10,741
Region Association: None
I had to take out 2 studs for my engine mount on my /6 because they were bent. PBlaster, vice grips, and a torch did the job. Using new bolts instead of studs to mount the mount.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jon H.
post Nov 10 2012, 11:13 AM
Post #11


Member
**

Group: Members
Posts: 242
Joined: 1-July 11
From: Ottawa, Canada
Member No.: 13,264
Region Association: Canada
QUOTE(SLITS @ Nov 10 2012, 04:52 AM) *

Those will still chew up the studs / ruin the threads.

Collet Stud Extractor Set

I was only $600 off (IMG:style_emoticons/default/sad.gif) (IMG:style_emoticons/default/sad.gif)

though you can purchase the collet holder and then add for the metric stud thread size you want. I've used one for removal and installation (no I don't own one, I borrow it).

The $84-90 dollar ones slide down past the threads and grab the shaft not the threads.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SLITS
post Nov 10 2012, 01:02 PM
Post #12


"This Utah shit is HARSH!"
**********

Group: Benefactors
Posts: 13,602
Joined: 22-February 04
From: SoCal Mountains ...
Member No.: 1,696
Region Association: None
QUOTE(Jon H. @ Nov 10 2012, 09:13 AM) *

QUOTE(SLITS @ Nov 10 2012, 04:52 AM) *

Those will still chew up the studs / ruin the threads.

Collet Stud Extractor Set

I was only $600 off (IMG:style_emoticons/default/sad.gif) (IMG:style_emoticons/default/sad.gif)

though you can purchase the collet holder and then add for the metric stud thread size you want. I've used one for removal and installation (no I don't own one, I borrow it).

The $84-90 dollar ones slide down past the threads and grab the shaft not the threads.


Yeah, so marks in the shaft don't count I take it. It has to grip a smooth surface somehow and the pictures show what amounts to a knurling device.

Oh well ...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
preach
post Nov 10 2012, 02:33 PM
Post #13


Ridge Runner
***

Group: Members
Posts: 1,084
Joined: 27-March 10
From: Live Free or Die
Member No.: 11,513
Region Association: North East States
Perhaps not best used in this case but figured I would share.

At work I have a set of vicegrips with nuts welded to the jaws. A hacksaw through the nut and you have yourself a very nice, non-marring set of stud removal/installation tools.

I have 1/4-20 through 1"-8.

Make a metric set and enjoy.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
stugray
post Nov 10 2012, 03:06 PM
Post #14


Advanced Member
****

Group: Members
Posts: 3,825
Joined: 17-September 09
From: Longmont, CO
Member No.: 10,819
Region Association: None
QUOTE
A hacksaw through the nut and you have yourself a very nice, non-marring set of stud removal/installation tools.

I wish you had a picture. I cant visualize what you are saying, but I have plenty of old vise grips and a welder....

QUOTE
The $84-90 dollar ones slide down past the threads and grab the shaft not the threads.


That is what I have but since it can accommodate many sizes of studs, it is too bulky to be of use on the inner studs. It is about as big around as a beer can.

Stu
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
preach
post Nov 10 2012, 03:21 PM
Post #15


Ridge Runner
***

Group: Members
Posts: 1,084
Joined: 27-March 10
From: Live Free or Die
Member No.: 11,513
Region Association: North East States
QUOTE(stugray @ Nov 10 2012, 04:06 PM) *

QUOTE
A hacksaw through the nut and you have yourself a very nice, non-marring set of stud removal/installation tools.

I wish you had a picture. I cant visualize what you are saying, but I have plenty of old vise grips and a welder....



No camera phones at work allowed.

Just clamp a nut near the tip of the jaws, weld it to the jaws, cut the nut in half with the jaws, clamp onto stud. Easy.

EDIT: I put a bolt in the nut before I weld so slag does not get into the threads of the nut.

These take a second to get used to, but once you use them you will feel the stud threads either engage with the nut or not. Make sure they engage.

You can clamp onto the stud pretty darn good with them.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
stugray
post Nov 11 2012, 02:36 PM
Post #16


Advanced Member
****

Group: Members
Posts: 3,825
Joined: 17-September 09
From: Longmont, CO
Member No.: 10,819
Region Association: None
Well thanks for the info!

The stud tool works, but cannot get on the inner studs.
So I used the 2 nut method & some pen. oil & heat and was eventually able to get them all out.
However it was a BITCH! I have put less torque on much larger stuff than it took to break these loose.
While I was removing the studs and cleaning them I smelled "Black Walnuts".
Some hardcore mech-heads will know what smells like black walnuts....



Anyway, next question: When reinstalling the studs, I plan on chasing the holes with a tap, then cleaning & re-greasing.
The PO obviously used loctite, but isn't an anti-seize more appropriate for a steel stud into Al. threads in the case?

Stu
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
stugray
post Nov 13 2012, 05:56 PM
Post #17


Advanced Member
****

Group: Members
Posts: 3,825
Joined: 17-September 09
From: Longmont, CO
Member No.: 10,819
Region Association: None
Never heard an answer:

"When reinstalling the studs, I plan on chasing the holes with a tap, then cleaning & re-greasing.
The PO obviously used loctite, but isn't an anti-seize more appropriate for a steel stud into Al. threads in the case?"

Do I use thread locker or anti-sieze?

Stu
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
brp986s
post Nov 13 2012, 09:41 PM
Post #18


Member
**

Group: Members
Posts: 434
Joined: 27-September 07
From: los angeles
Member No.: 8,167
You chase with a chaser, not a tap. If you chase with a tap your stud will fit wobbly. Use threadlocker, not anti-seize.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mrbubblehead
post Nov 13 2012, 10:06 PM
Post #19


Twodollardoug
***

Group: Members
Posts: 1,155
Joined: 17-December 10
From: calimesa ca.
Member No.: 12,492
Region Association: Southern California
QUOTE(brp986s @ Nov 13 2012, 08:41 PM) *

You chase with a chaser, not a tap. If you chase with a tap your stud will fit wobbly. Use threadlocker, not anti-seize.


i would even be afraid to chase them. or do chasers just clean up the threads? my worry would be removing ANY material from the threads.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post Nov 13 2012, 10:17 PM
Post #20


914 Freak!
***************

Group: Retired Admin
Posts: 20,180
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
Don't chase. Just reinstall.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

2 Pages V  1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 2nd April 2026 - 07:50 AM
Invision Power Board v9.1.4 © 2026  IPS, Inc.
...
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...