 Upper Wheelhouse repair/ hell hole help! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Dasnowman |
 Apr 7 2013, 12:17 AM
Post
#1
|
|
You miss 100% of shots you don't take!  Group: Members Posts: 265 Joined: 24-May 12 From: Tricities, B.C./ Lake Whatcom Member No.: 14,477 Region Association: Canada  |
I have a couple of questions about the upper wheelhouse repair. I ended up cutting the rear 1/4 for better access. The wheelhouse itself is rusted thru in a couple of places but metal around the suspension and mount seems really solid.. What are my options for repair ? Was thinking of maybe notching out where the suspension bracket and tack weld over it? Or should I remove the suspension mount completely? I have this repair panel from AA, I also have the jack point cover as the bottom had some rust. (IMG:http://www.914world.com/bbs2/uploads_offsite/c767170.r70.cf2.rackcdn.com-14477-1365315440.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i156.photobucket.com-14477-1365315441.2.jpg) The round hole looks like someone made it to check the condition of the hell hole? (IMG:http://www.914world.com/bbs2/uploads_offsite/i156.photobucket.com-14477-1365315443.3.jpg) |
   |
 
|
| Dasnowman |
Apr 7 2013, 12:27 AM
Post
#2
|
|
You miss 100% of shots you don't take! Group: Members Posts: 265 Joined: 24-May 12 From: Tricities, B.C./ Lake Whatcom Member No.: 14,477 Region Association: Canada |
Was thinking of notching it something like this ! Of course this is the inside view and the left side in the minni picture. (IMG:http://www.914world.com/bbs2/uploads_offsite/i156.photobucket.com-14477-1365316059.1.jpg) |
|
|
|
| Dasnowman |
Apr 7 2013, 10:13 AM
Post
#3
|
|
You miss 100% of shots you don't take! Group: Members Posts: 265 Joined: 24-May 12 From: Tricities, B.C./ Lake Whatcom Member No.: 14,477 Region Association: Canada |
ANYONE? I was hoping on working on this today!
|
|
|
|
| cary |
Apr 7 2013, 10:27 AM
Post
#4
|
|
Advanced Member Group: Members Posts: 3,900 Joined: 26-January 04 From: Sherwood Oregon Member No.: 1,608 Region Association: Pacific Northwest 
|
My .02c.
That's not an overlay part. You can cut it up and use in sections. But not lay over. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st July 2025 - 03:50 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.