Valve adj/pushrod tube seals, Setting TDC before loosing rocker arms |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Valve adj/pushrod tube seals, Setting TDC before loosing rocker arms |
Mike Wofford |
Jul 20 2003, 10:46 AM
Post
#1
|
Member Group: Members Posts: 68 Joined: 29-April 03 From: Olympia, Wa. Member No.: 629 |
Question????? Do I set #1 to TDC before I loosen the Rocker arms. I am changing O-rings and need to do a valve adj. when done. Mike
|
tryan |
Jul 20 2003, 11:02 AM
Post
#2
|
Senior Member Group: Members Posts: 553 Joined: 22-January 03 From: smokey mountains gatlinburg tn Member No.: 184 |
there is a plastic plug next to the oil fill for finding tdc. double check with the dizzy to make sure your not 180 out. spin those push rods on the reinstall to seat them in the lifters
|
Mike Wofford |
Jul 20 2003, 01:33 PM
Post
#3
|
Member Group: Members Posts: 68 Joined: 29-April 03 From: Olympia, Wa. Member No.: 629 |
Thanks Tryan, so I need to set #1 to TDC before loosening the rocker assembly.
|
tryan |
Jul 20 2003, 01:50 PM
Post
#4
|
Senior Member Group: Members Posts: 553 Joined: 22-January 03 From: smokey mountains gatlinburg tn Member No.: 184 |
you'll need to get tdc to set the vavles when you get done.
i would do a search on the torque specs for the rocker assemblies and what kind of sealant is recommended for the pushrod o-rings. you might want to download the pdf file. |
Lo-Fi Version | Time is now: 15th June 2024 - 03:27 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |