Newbie Introduction, Buy or build |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Newbie Introduction, Buy or build |
Midenginer |
Dec 14 2020, 01:37 AM
Post
#1
|
Newbie Group: Members Posts: 24 Joined: 13-December 20 From: Laguna Beach, CA Member No.: 24,982 Region Association: Southern California |
Hello,
Craig here from Southern California, good to meet you all! I'm pretty excited about looking into buying a childhood dream car as a weekly driver for my short commute 1000' down the hill and up the canyon, Sunday drive, autocross, etc. and could use some advice. My only other real sports car was one of the first 2006 Cayman S, which I had as my daily driver company car up to 115k miles. Loved it but maintenance / depreciation were costly and our first son in 2010 and second in 2016 led to a Volt and now my 2019 Cherokee Trailhawk which I'll keep as my daily driver. I love watching all the beauties and reading the comments on BringaTrailer. Frankly, I should have bought a classic and a commuter rather than the Cayman in '06. My other 70's childhood dream cars Pantera, Ferrari's, Countach are all out of my budget and just as well because I think a 914 will suit me perfectly...but I've never even ridden in one, let alone driven one, so that's first on my list to do this week! I'm not too concerned that I'll love driving one so the next big question is, for a budget of low $20's what should I get; A) Best 2.0 I can find, hopefully black, with some smart mechanical and cosmetic modifications. Merry Christmas to me in 2020 possibly! B) Can I build a 914 6 driver from a roller for that $? I would get the body work done, stick to a Porsche motor, any necessary suspension work, etc to start. I realize 6 restomods sell way above my budget but could I have a solid 6 driver built from a roller within my budget and then improve on it from there? I wouldn't want to wait years to get rolling either. Merry Christmas to me in 21? 22?? ok either way but the budget doesn't double;). BTW, I don't have the experience, tools, time, space to do the work myself, as much as I like the idea just not realistic, so would have to find pros to do it. I lean towards B but if it's a stupid idea I'm ok, even appreciate, if you tell me so. If its unanimously a genius idea I'm ok with that too! Hope this is the appropriate forum for this question. Thanks for your time and expertise. Look forward to any comments... Cheers, Craig |
falcor75 |
Dec 14 2020, 02:02 AM
Post
#2
|
Senior Member Group: Members Posts: 1,579 Joined: 22-November 12 From: Sweden Member No.: 15,176 Region Association: Scandinavia |
For 20k forget about the -6 unless you luck out on a cheap (10k) running engine with all the ancillaries as the oil tank/ etc. Then you could spend the other half on a working car and ditch the engine. It would still need alot of DIY work to make it a running car tho.
If you only want to drive, then spend all of it on a running car, the best possible. Put out a WTB add but dont show your budget and be patient. Give it a year and if no score by then, reevaluate. The people on this board knows what to look for and what to walk away from, use their wisdom, we have done most of the mistakes already. (IMG:style_emoticons/default/biggrin.gif) |
Frankvw |
Dec 14 2020, 03:21 AM
Post
#3
|
working on my first 914 ! Group: Members Posts: 651 Joined: 13-April 16 From: Holland, the Netherlands Member No.: 19,896 Region Association: Europe |
Option A it is, since Option B is no option, seriously.
Especially since you mention you don't have the experience, tools, time, space to do the work yourself. your 20K will be spend on the experts you need alone. Buy a 20K driver, like Matts says through here is a good option, and the wife will still be happy you are not in a moneypit that does not drive. She will love the driving 914 , romance will be back in an instant and from there you have credits again and plan to buy a real 6 :-) |
Racer |
Dec 14 2020, 06:29 AM
Post
#4
|
Senior Member Group: Members Posts: 787 Joined: 25-August 03 From: Northern Virginia Member No.: 1,073 Region Association: MidAtlantic Region |
x2 on buy. Plenty of nice cars out there for sale. Given a busy family, I would picture a "build" spending most of the time unbuilt in a bay of your garage. I can't imagine there aren't other our here local to you to offer up a ride (even during a pandemic?) as these cars are infectious!
But, even the "best" one will have some niddling things that need attention and the worst bought ones will need a LOT of attending too. And you will need to learn about "old school maintenance" vs just plugging a scanner into an OBDII port. Drool over samples that have sold on BAT and here and spend some time researching these cars. Wipe those dreams of a $20K 914/6 (or -6 project) unless you do ALL body/mechanical/paint yourself AND you don't keep track of any receipts, physically or mentally (IMG:style_emoticons/default/wink.gif) |
Superhawk996 |
Dec 14 2020, 07:00 AM
Post
#5
|
914 Guru Group: Members Posts: 5,906 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch |
Wipe those dreams of a $20K 914/6 (or -6 project) unless you do ALL body/mechanical/paint yourself AND you don't keep track of any receipts, physically or mentally (IMG:style_emoticons/default/wink.gif) (IMG:style_emoticons/default/agree.gif) You can't touch engine and the parts needed for conversion for $20K. I'm in the process myself and have the tools, space, and can do almost all work myself Currently in for about $10k in 2.4L machine work for case, heads, crank. OEM bearings alone are $1200. I'm building motor myself and I'm no where near done yet. Still need Pistons & cylinder, induction, new cam chains, chain ramps, rebuild hydraulic tensioners, misc. 914/6 Exhaust headers $1400 - $2300 (w/heat exchangers) 914/6 Muffler - $600-800 Oil Lines hard & soft lines - $300-500 Engine Mount $350 Oil Tank & filler - $500 - 900 914/6 Flywheel - $500 5 Lug conversion - $500 - $1K not counting the actual wheels. Still a ton of other miscellaneous bits I've not even mentioned. You get the picture. Unless you're crazy like me (IMG:style_emoticons/default/screwy.gif) and enjoy building stuff as therapy, you're far better off to buy a conversion that is already done. Stick with Option A. Buy the best 914/4 car you can afford & then enjoy it. Buy a conversion later on as funds permit. |
Cairo94507 |
Dec 14 2020, 07:52 AM
Post
#6
|
Michael Group: Members Posts: 9,836 Joined: 1-November 08 From: Auburn, CA Member No.: 9,712 Region Association: Northern California |
Hi Craig - I agree with all of the above. Buy the best driver you can afford. Sure, shoot for a 2.0 with minimal rust in the areas of concern. I would not be worried about exterior body panels that need dents removed or paint work. That is the easy-peasy stuff. It is the structural areas that get serious quickly. Fortunately you are in CA, and in your area you should be able to find a nice 914 without a lot of drama. I think your $20K budget will get you a car that you can drive soon after buying.
However, I would still expect to do basic stuff before driving if it has not already been done: SS fuel lines, brake system overhaul, run through all of the electrical and clean every single ground connection. Tires probably even if the tread looks good if the DOT codes are outside of their lifespan. Complete tune-up including valve adjustment, plugs, wires, oil/filter, transaxle gear oil change, etc. These cars are so much fun to drive. I have been addicted ever since I bought a brand new '73 2.0 in 1974. (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/welcome.png) |
Coondog |
Dec 14 2020, 08:42 AM
Post
#7
|
Advanced Member Group: Members Posts: 2,089 Joined: 24-September 15 From: Apple Valley Calif Member No.: 19,195 Region Association: Southern California |
Welcome, your first step is to hook up with myself, Keith, Steve, Hans and some of the other Teeners at the Crystal Cove Cars and Coffee held every Saturday morning. Any of us would be more then happy to give you your first 914 experience.
Agreed with comments above, while the 73/74 2.0 is what most people look for my thoughts are buy the best 914 you can afford with 2k left over for changes you make or the hiccups that will occur. |
bbrock |
Dec 14 2020, 09:10 AM
Post
#8
|
914 Guru Group: Members Posts: 5,269 Joined: 17-February 17 From: Montana Member No.: 20,845 Region Association: Rocky Mountains |
Add me to the list of folks saying that Option A is your ONLY option. This comes from a guy who loves a project and bringing a basket case back to the living. $20K is what you could expect to spend building a roller IF you do the work yourself. For that $ you can buy a very nice car ready for those commutes.
Restorations are almost never money making propositions. They produce their own rewards but not in the form of profit. and (IMG:style_emoticons/default/welcome.png) |
914e |
Dec 14 2020, 09:14 AM
Post
#9
|
Member Group: Members Posts: 496 Joined: 21-February 20 From: Arizona Member No.: 23,951 Region Association: Southwest Region |
I would buy the best driver you can. Get some basic tools, you will likely need them. Is is a 50 year old car. 50 years ago cars needed much more mechanical attention. When kids are older they can help you with the conversion. Set aside enough money to have the brake hoses and soft fuel lines replaced, unless they have a recent receipt showing them replaced.
|
Midenginer |
Dec 14 2020, 09:41 AM
Post
#10
|
Newbie Group: Members Posts: 24 Joined: 13-December 20 From: Laguna Beach, CA Member No.: 24,982 Region Association: Southern California |
Thanks guys! I had a strong feeling that was going to be the consensus. Just needed to confirm before mentally shifting into option A. As an architect I've been able to save much money and get exactly what I want doing design, permit and the GC work myself on remodels. A car build, not being in my wheelhouse, will need to await my retirement or lottery win then.
I'll read your comments again and what I can find on rust, FI, etc. while heading over to classifieds. Coondog, thanks for the offer! Will try to get there for sure. May still try to test drive the local one for sale on BAT as my first dog leg experience. Thanks again and Happy Holidays! Craig |
gereed75 |
Dec 14 2020, 09:45 AM
Post
#11
|
Senior Member Group: Members Posts: 1,260 Joined: 19-March 13 From: Pittsburgh PA Member No.: 15,674 Region Association: North East States |
Definitely A - B at $20K is a pipe dream. And it sounds like it is a 914 for you, not a Miata, or a BRZ or a Pontiac Solstice. If it must be, it must be.
The good news is if it turns bad, and you bought right, you should not lose money. Buying right and finding a reliable honest shop that can get you out of the inevitable mechanical jam are probably the keys to making this work for you. Maybe the right shop can also help with the right buy. In any case, You are in the right place for getting help with those two things. People here can And will help. Take advantage. Good luck |
Coondog |
Dec 14 2020, 10:22 AM
Post
#12
|
Advanced Member Group: Members Posts: 2,089 Joined: 24-September 15 From: Apple Valley Calif Member No.: 19,195 Region Association: Southern California |
Thanks guys! I had a strong feeling that was going to be the consensus. Just needed to confirm before mentally shifting into option A. As an architect I've been able to save much money and get exactly what I want doing design, permit and the GC work myself on remodels. A car build, not being in my wheelhouse, will need to await my retirement or lottery win then. I'll read your comments again and what I can find on rust, FI, etc. while heading over to classifieds. Coondog, thanks for the offer! Will try to get there for sure. May still try to test drive the local one for sale on BAT as my first dog leg experience. Thanks again and Happy Holidays! Craig We can always help if your BAT car is local |
Midenginer |
Dec 14 2020, 11:07 AM
Post
#13
|
Newbie Group: Members Posts: 24 Joined: 13-December 20 From: Laguna Beach, CA Member No.: 24,982 Region Association: Southern California |
Thanks guys! I had a strong feeling that was going to be the consensus. Just needed to confirm before mentally shifting into option A. As an architect I've been able to save much money and get exactly what I want doing design, permit and the GC work myself on remodels. A car build, not being in my wheelhouse, will need to await my retirement or lottery win then. I'll read your comments again and what I can find on rust, FI, etc. while heading over to classifieds. Coondog, thanks for the offer! Will try to get there for sure. May still try to test drive the local one for sale on BAT as my first dog leg experience. Thanks again and Happy Holidays! Craig We can always help if your BAT car is local Great, much appreciated. I'm lurking on the 2.0 bidding in 3 days in Santa Ana currently at $11,164. Looks pretty nice to me. I'm going to register to bid and keep watching. Comments on that one appreciated. |
brant |
Dec 14 2020, 11:12 AM
Post
#14
|
914 Wizard Group: Members Posts: 11,641 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
Thanks guys! I had a strong feeling that was going to be the consensus. Just needed to confirm before mentally shifting into option A. As an architect I've been able to save much money and get exactly what I want doing design, permit and the GC work myself on remodels. A car build, not being in my wheelhouse, will need to await my retirement or lottery win then. I'll read your comments again and what I can find on rust, FI, etc. while heading over to classifieds. Coondog, thanks for the offer! Will try to get there for sure. May still try to test drive the local one for sale on BAT as my first dog leg experience. Thanks again and Happy Holidays! Craig We can always help if your BAT car is local Great, much appreciated. I'm lurking on the 2.0 bidding in 3 days in Santa Ana currently at $11,164. Looks pretty nice to me. I'm going to register to bid and keep watching. Comments on that one appreciated. Send us a link to the BAT I can promise not to bid brant |
Midenginer |
Dec 14 2020, 11:37 AM
Post
#15
|
Newbie Group: Members Posts: 24 Joined: 13-December 20 From: Laguna Beach, CA Member No.: 24,982 Region Association: Southern California |
Thanks guys! I had a strong feeling that was going to be the consensus. Just needed to confirm before mentally shifting into option A. As an architect I've been able to save much money and get exactly what I want doing design, permit and the GC work myself on remodels. A car build, not being in my wheelhouse, will need to await my retirement or lottery win then. I'll read your comments again and what I can find on rust, FI, etc. while heading over to classifieds. Coondog, thanks for the offer! Will try to get there for sure. May still try to test drive the local one for sale on BAT as my first dog leg experience. Thanks again and Happy Holidays! Craig We can always help if your BAT car is local Great, much appreciated. I'm lurking on the 2.0 bidding in 3 days in Santa Ana currently at $11,164. Looks pretty nice to me. I'm going to register to bid and keep watching. Comments on that one appreciated. Send us a link to the BAT I can promise not to bid brant Thanks, I don't think BAT is any secret so if I lose to a fellow 914worlder, I'll chalk up to experience. Here it is. Likes, Upgraded 2.0, color combo wouldn't be my top pick but up there on my list. Appears to be in good driver condition. Concern, mention of accident. https://bringatrailer.com/listing/1973-porsche-914-2-0-35/ |
Spoke |
Dec 14 2020, 11:48 AM
Post
#16
|
Jerry Group: Members Posts: 6,992 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None |
(IMG:style_emoticons/default/welcome.png)
Keep the big picture in mind: What do you want to do with this car? A) Turn the key and drive like hell. B) Build a car? From your intro it seems you want to drive the car. Your budget seems good to buy a nice 914. Get the best one you can find and drive the wheels off of it. If you really want a /6, you're best off buying one already converted. Doing it yourself via pros will cost big bucks, probably 50-100k (engine, ancillaries, bigger brakes, suspension upgrades, etc.) |
Midenginer |
Dec 14 2020, 11:56 AM
Post
#17
|
Newbie Group: Members Posts: 24 Joined: 13-December 20 From: Laguna Beach, CA Member No.: 24,982 Region Association: Southern California |
(IMG:style_emoticons/default/welcome.png) Keep the big picture in mind: What do you want to do with this car? A) Turn the key and drive like hell. B) Build a car? From your intro it seems you want to drive the car. Your budget seems good to buy a nice 914. Get the best one you can find and drive the wheels off of it. If you really want a /6, you're best off buying one already converted. Doing it yourself via pros will cost big bucks, probably 50-100k (engine, ancillaries, bigger brakes, suspension upgrades, etc.) Yes A, I suspected as much on B but rather than spend weeks crunching specs and numbers thankfully I could have you guys talk sense into me overnight. I'm now looking to get into one. Hard part now will be to know when to stay patient and wait vs jump on a good one before someone else does:) |
Coondog |
Dec 14 2020, 12:00 PM
Post
#18
|
Advanced Member Group: Members Posts: 2,089 Joined: 24-September 15 From: Apple Valley Calif Member No.: 19,195 Region Association: Southern California |
Hope you are able to purchase the BAT car but I am afraid the reserve is going to be in the range of 35k.
It does have a great license plate. |
PanelBilly |
Dec 14 2020, 12:06 PM
Post
#19
|
914 Guru Group: Members Posts: 5,817 Joined: 23-July 06 From: Kent, Wa Member No.: 6,488 Region Association: Pacific Northwest |
Buy a Miata
|
rjames |
Dec 14 2020, 12:08 PM
Post
#20
|
I'm made of metal Group: Members Posts: 3,960 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest |
|
Lo-Fi Version | Time is now: 11th June 2024 - 07:58 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |