 The other side of the story, my a/x fantasy weekend |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Trekkor |
 Jul 25 2005, 02:12 PM
Post
#1
|
|
I do things...  Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California  |
A/X was fantastic...It's the ride home to Napa. (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif)
Traffic was horrible and I was tired. We're sloooowly motoring over hiway 17 ( super steep and windy, twisty ) and this guy pulls up along side pointing to the trailer. I can talk to him out the window and he says there is a lot of noise coming off the trailer. Wheel bearings he says. Not smoking, but I can see the wheel flopping in the fenderwell. I repacked all the bearings and adjusted them before the long haul to WCC. I pulled over and jacked up the trailer. Left rear bearing ( doulble axle trailer ) was wasted. (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) I was looking for a place to leave the trailer so I could drive the car home and have my wife follow me in the truck. Some nieghbors on Bill's street in San Jose let me leave it. I'm going to go deal with it now. (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) KT |
   |
 
|
| nebreitling |
Jul 25 2005, 03:09 PM
Post
#2
|
|
Member Emeritus Group: Members Posts: 3,314 Joined: 26-March 03 From: San Francisco Member No.: 478 |
that sucks, dude.
traffic was horrrrrrrrible. i ended up pulling over at a denny's and just eating dinner. got home at 9. ughhhh.... |
|
|
|
| Trekkor |
Jul 25 2005, 08:49 PM
Post
#3
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
I made it back...On three wheels (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)
I stopped at a place in San Leandro and the guy looked at the hub from the the trailer. First he just stared at it. Then he started shaking his head. Next he starts laughing. (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif) Then he's like: " Hey, Moe! Come look at this!" The next guy comes out and he laughs. Turns out with the 40 years of trailer suspension experience between them, they have never seen anything like it. (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) The old hubs are "bolt on", so I'll hunt for something up to date. I have 3 weeks. KT |
|
|
|
| Trekkor |
Aug 5 2005, 11:16 AM
Post
#4
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
As it turns out, the axles have obsolete spindles and actual ball bearings.
I have two new 3500# capacity drop axles with hubs in my yard. Today I need to assemble them and install before the a/x tomorrow. New car trailers are around $2500, so the $400 for the parts was easy. KT |
|
|
|
| Mueller |
Aug 5 2005, 11:23 AM
Post
#5
|
||
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None 
|
hmmmm, good reminder to check my trailer wheel bearings....Hey Jon, if you read this and since you have my trailer....got a few free minutes to check 'em out ??? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) |
||
|
|
|
||
| Trekkor |
Aug 5 2005, 03:50 PM
Post
#6
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
Done!
about four hours to weld on the spring center tabs, install axles with u-bolts, pack bearings, install hubs and wheels back on. Time for a test tow and load the car. Even had time for a barley... (IMG:http://www.914world.com/bbs2/html/emoticons/beer3.gif) KT Attached image(s) 
|
|
|
|
| ppickerell |
Aug 5 2005, 04:22 PM
Post
#7
|
|
914 addicted Group: Members Posts: 1,679 Joined: 14-October 03 From: Pleasanton, CA. Member No.: 1,246 |
Trek,
Off to cook yer noggin at Santa Rosa tomorrow? |
|
|
|
| ppickerell |
Aug 5 2005, 04:22 PM
Post
#8
|
|
914 addicted Group: Members Posts: 1,679 Joined: 14-October 03 From: Pleasanton, CA. Member No.: 1,246 |
Crania cooking cone killer
|
|
|
|
| Trekkor |
Aug 5 2005, 06:38 PM
Post
#9
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
Leaving at 7:00a.m.
I've got some whippin' to do (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif) KT |
|
|
|
| grantsfo |
Aug 5 2005, 07:56 PM
Post
#10
|
||
|
Arrrrhhhh! Group: Members Posts: 4,327 Joined: 16-March 03 Member No.: 433 Region Association: None |
Bring it on! I'll be there with the Echo on street tires. Lets say if I get within 2 seconds of you - I buy you a beer! |
||
|
|
|
||
| drew365 |
Aug 5 2005, 07:59 PM
Post
#11
|
|
These are the good old days! Group: Members Posts: 2,004 Joined: 29-December 02 From: Sunny So. Cal. Member No.: 37 |
Hey Trekkor; you're going to corner balance that trailer aren't you? (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
|
|
|
| Trekkor |
Aug 5 2005, 09:52 PM
Post
#12
|
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th June 2024 - 12:07 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.