914 Sequential Megasquirt kit. Options

[Beat32]

Happy New Year everyone!

Over the past year, I've made a nearly plug and play sequential fuel and ignition kit for 914s (Megasquirt). Originally, it was just something I wanted to do with my car. But after receiving such a good response this past summer - showing it to people in Ontario (at the Mosport 914 meet and two well-known 914 shops), I've realized this should be available for everyone to enjoy.

I didn't want any holes or permanent modifications, so everything mounts to factory locations and is fully reversible - aside from a muffler bung. The harness replaces the fuel injection harness, the coils mount to where the coil originally mounted etc. I have made an instruction guide addressing as many issues as I could think of that may or may not pop up, with lots of pictures that purchasers will receive (both a physical and digital copy of). The ECU comes pre-loaded with a base tune for 1.7 or 2.0 cars to speed up the tuning process and the harness has every connector labelled that is fully tested before shipping. In general, the whole kit is as modular, factory looking, and plug and play as I could make it.

My favorite comment so far, “You can just drive it like a normal car.”

Price is $3,630 USD at the current exchange rate.

Both local and international shipping are available, if your location doesn't not have a shipping option on my website, please contact me and I will get a custom quote.

So, if you've ever wanted to modernize your 914, please check it out! There is a lot more information on my website.

https://imaginecreate3d.ca/products/1970-76...ignition-system

If you're in Ontario and looking for someone to install the kit. I have a shop that has stated they would be interested in doing the installs.

I am located in Ontario, Canada.

I wish to keep my contact info private to avoid spam, but please feel free to contact me here or through my website.

Thanks for looking!