 Fresh Air Control, Need to access rear… |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| jim_hoyland |
 Feb 5 2025, 02:06 PM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,806 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
The fresh air vent control has three cables that attaché to valves in the frunk; two go to a valve on the drives side ( see pic ), and one attaches to the fan box.
Question is: if I release the two cables on the driver side valve will the fresh air control pull out enough to access the back ? Attached thumbnail(s) 
|
   |
 
|
| windforfun |
Feb 5 2025, 06:06 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,057 Joined: 17-December 07 From: Blackhawk, CA Member No.: 8,476 Region Association: None
|
Given the huge time constant re replies to this post, I think you're about to give us the answer. I would have dug in by now. Be careful, I see lots of sharp edges.
(IMG:style_emoticons/default/beer3.gif) (IMG:style_emoticons/default/beer3.gif) (IMG:style_emoticons/default/beer3.gif) |
 |
|
| jim_hoyland |
Feb 5 2025, 07:57 PM
Post
#3
|
|
Get that VIN ? Group: Members Posts: 9,806 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
I agree; thinking the tank needs to come out and fan housing is gonna have to come out in. order to access all three cables; did this years ago.
|
|
|
|
| friethmiller |
Feb 5 2025, 08:59 PM
Post
#4
|
|
Senior Member Group: Members Posts: 937 Joined: 10-February 19 From: Austin, TX Member No.: 22,863 Region Association: Southwest Region
|
I think y'all are correct. BTW, I have never got the air to come out of my dash vents since my rebuild. Is there a diagram for these control cables somewhere?
|
|
|
|
| hndyhrr |
Feb 5 2025, 09:17 PM
Post
#5
|
|
Senior Member Group: Members Posts: 622 Joined: 1-September 13 From: central point,oregon Member No.: 16,332 Region Association: Pacific Northwest
|
Maybe this Link (below) will help. Mark those cables very good. It can be done without pulling tank or air box but it is a Bitch! Ask me how I know.
http://www.914world.com/bbs2/lofiversion/i...php?t86942.html |
|
|
|
| jim_hoyland |
Feb 5 2025, 09:22 PM
Post
#6
|
|
Get that VIN ? Group: Members Posts: 9,806 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
QUOTE(hndyhrr @ Feb 5 2025, 07:17 PM)  Maybe this Link (below) will help. Mark those cables very good. It can be done without pulling tank or air box but it is a Bitch! Ask me how I know. http://www.914world.com/bbs2/lofiversion/i...php?t86942.html How far could the control be pulled out ? I want to access the bulb holders. |
|
|
|
| hndyhrr |
Feb 5 2025, 10:09 PM
Post
#7
|
|
Senior Member Group: Members Posts: 622 Joined: 1-September 13 From: central point,oregon Member No.: 16,332 Region Association: Pacific Northwest
|
Control will come out somewhat. After you disconnect cables in Frunk it'll pull right out.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd July 2025 - 07:42 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.