![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
yellownerd |
![]()
Post
#1
|
Newbie ![]() Group: Members Posts: 16 Joined: 18-May 22 From: USA Member No.: 26,562 Region Association: Upper MidWest ![]() |
Feeler post here… Would sell for sure - this isn’t an “I know what I’ve got” post, frankly - I don’t. That’s why I’m asking.
32k mile lower end, fresh (summertime Sunday driver) top end with less than 2000 miles, 90mm Bore x 66mm Stroke , 215mm 4 spring Sachs clutch, Weber 32/36 Progressive carb. Built by mshantz if that means anything- eBay purchased/swapped a dozen years ago- well maintained. ![]() |
930cabman |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,074 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
3k
|
Front yard mechanic |
![]()
Post
#3
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,321 Joined: 23-July 15 From: New Mexico Member No.: 18,984 Region Association: None ![]() ![]() |
|
yellownerd |
![]()
Post
#4
|
Newbie ![]() Group: Members Posts: 16 Joined: 18-May 22 From: USA Member No.: 26,562 Region Association: Upper MidWest ![]() |
Theres a picture. The car is not for sale- just the engine. |
Craigers17 |
![]()
Post
#5
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 844 Joined: 5-August 17 From: Rome, GA Member No.: 21,317 Region Association: South East States ![]() ![]() |
If the engine is still in the car, do you have any video of start up and running?
|
yellownerd |
![]()
Post
#6
|
Newbie ![]() Group: Members Posts: 16 Joined: 18-May 22 From: USA Member No.: 26,562 Region Association: Upper MidWest ![]() |
If the engine is still in the car, do you have any video of start up and running? Yes. It’s not running as well as I’d like, this progressive Weber isn’t the carb for job. https://imgur.com/a/rraGqpy |
bdstone914 |
![]()
Post
#7
|
bdstone914 ![]() ![]() ![]() ![]() Group: Members Posts: 4,911 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 ![]() |
If the engine is still in the car, do you have any video of start up and running? Yes. It’s not running as well as I’d like, this progressive Weber isn’t the carb for job. https://imgur.com/a/rraGqpy I know Mike Schantz and he is meticulous at engine building. Carb is probably the running problem |
yellownerd |
![]()
Post
#8
|
Newbie ![]() Group: Members Posts: 16 Joined: 18-May 22 From: USA Member No.: 26,562 Region Association: Upper MidWest ![]() |
QUOTE I know Mike Schantz and he is meticulous at engine building. Carb is probably the running problem Awesome- send my regards! He’ll get a laugh out of the presence of this carb I’m sure. 100% the problem. I paid him $2300 if I recall, maybe 13 years ago. I swapped this in for orig 1.7- changed the oil thrice, it’s been great even with this carb. The plan was to rebuilt the original case and I’m happy to say I’m finally getting around to it. ![]() |
930cabman |
![]()
Post
#9
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 4,074 Joined: 12-November 20 From: Buffalo Member No.: 24,877 Region Association: North East States ![]() ![]() |
For all the bad press we hear about single carbs, I bought a 1975 1.8 example (original Cali car) with a single center mounted carb. Have since rebuilt the engine and added twin Webers. Always started well (choke worked good), but she ran out of breath over 3-4k rpms.
|
Superhawk996 |
![]()
Post
#10
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,042 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch ![]() ![]() |
(IMG:style_emoticons/default/av-943.gif) that cabman is the only one brave enough to throw a number out there.
|
Cairo94507 |
![]()
Post
#11
|
Michael ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,319 Joined: 1-November 08 From: Auburn, CA Member No.: 9,712 Region Association: Northern California ![]() ![]() |
Beautiful 914; love the steelies. (IMG:style_emoticons/default/beerchug.gif)
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 11th May 2025 - 01:30 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |