 Thick oil pump gasket, Pump doesn’t line up |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Chad911sc |
 Jan 17 2026, 10:26 AM
Post
#1
|
|
Member  Group: Members Posts: 250 Joined: 24-September 24 From: Florida Member No.: 28,374 Region Association: South East States  |
So my plan was to start assembling the 2056 today, but I found this when placing the oil pump into the case. I measured the gap needed to fill with a gasket, and it’s right at 3mm. Do they make a thick pump to case gasket that will fill this space, so that the rubber sealing ring will be in the case instead of hanging out the back of it??
The gaskets that came with the pump are way to thin to place the pump in the correct position. Attached thumbnail(s)   
|
   |
 
|
| fixer34 |
Jan 17 2026, 02:30 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,380 Joined: 16-September 14 From: Chicago area Member No.: 17,908 Region Association: Upper MidWest 
|
I don't think you should need a 3mm thick gasket, the paper style is normal.
Either the pump is machined incorrectly or the mounting surface was milled way too much. Hoping it just a bad pump... |
 |
|
| Geezer914 |
Jan 17 2026, 02:40 PM
Post
#3
|
|
Geezer914 Group: Members Posts: 2,191 Joined: 18-March 09 From: Salem, NJ Member No.: 10,179 Region Association: North East States
|
Check the clearance to the cam gear with the cam installed.
|
|
|
|
| Montreal914 |
Jan 17 2026, 03:03 PM
Post
#4
|
|
Advanced Member Group: Members Posts: 2,009 Joined: 8-August 10 From: Claremont, CA Member No.: 12,023 Region Association: Southern California
|
That groove tawards the inside doesn't look like an O-ring groove, if this is what you are thinking about. (IMG:style_emoticons/default/confused24.gif)
|
|
|
|
|
|
Lo-Fi Version | Time is now: 17th January 2026 - 03:26 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.