 Correct order horn connector spacers, Looking for the right order to fix the standard horn connector set |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Marcel Aircooled |
 Feb 13 2026, 08:31 AM
Post
#1
|
|
Member  Group: Members Posts: 53 Joined: 28-April 24 From: The Netherlands Member No.: 28,087 Region Association: Europe  |
So I bought a standard 38cm steering wheel plus horn and had to replace the spacer and screw set to fix the horn connector.
I got the set from Sportwagen Eckert in Germany (I live in The Netherlands) and not sure what the correct order is to fix the metal and plastic spacers to make my horn work in the end. So I have this:  Starting from the horn up side down what do I need to add first before installing the base plate? And what inbetween the base plate and the connector? Finally what on top? Is it just the order from the picture above: horn - black pieces - base plate - orange spacer and big metal spacer - connector - small spacer and screw? Pictures would be perfect! Thanks! |
   |
 
|
| Shivers |
Feb 13 2026, 09:19 AM
Post
#2
|
|
Senior Member Group: Members Posts: 3,263 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California |
QUOTE(Marcel Aircooled @ Feb 13 2026, 06:31 AM)  So I bought a standard 38cm steering wheel plus horn and had to replace the spacer and screw set to fix the horn connector. I got the set from Sportwagen Eckert in Germany (I live in The Netherlands) and not sure what the correct order is to fix the metal and plastic spacers to make my horn work in the end. So I have this: Starting from the horn up side down what do I need to add first before installing the base plate? And what inbetween the base plate and the connector? Finally what on top? Is it just the order from the picture above: horn - black pieces - base plate - orange spacer and big metal spacer - connector - small spacer and screw? Pictures would be perfect! Thanks! I couldn’t find a write up, so I pulled mine apart. Black plastic goes first. Mine did not have the large metal washers (3rd part down in your image.) but there are three bosses casted to the actual wheel that look the same size.  |
|
|
|
| Marcel Aircooled |
Feb 13 2026, 09:22 AM
Post
#3
|
|
Member Group: Members Posts: 53 Joined: 28-April 24 From: The Netherlands Member No.: 28,087 Region Association: Europe |
Perfect, thanks so much!
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th February 2026 - 11:50 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.