 Installing hew engine bay seals, Anyone have some helpful tips? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| robkammer |
 Apr 18 2026, 10:59 AM
Post
#1
|
|
Robbo  Group: Members Posts: 269 Joined: 7-January 21 From: Vermilion Ohio Member No.: 25,049 Region Association: NineFourteenerVille  |
Teeners, as the time gets closer to my engine being delivered, I’m closing in on finishing the engine bay. I’ve installed new seals in our 88 911, but the 914 seal rails don’t appear to have any openings to start at. ANY helpful tips will be appreciated. Thanks, Robbo
|
   |
 
|
| Chad911sc |
Apr 18 2026, 12:27 PM
Post
#2
|
|
Member Group: Members Posts: 306 Joined: 24-September 24 From: Florida Member No.: 28,374 Region Association: South East States |
The big thick rear engine seal has an opening that you can slide it into and work it around easily. The sides and the front seal, I just pried open the end of the rail slightly, and started the seal into the rail. Worked it down into place, and then taped the rail back into shape with small body hammer very lightly.
Attached thumbnail(s) 
|
 |
|
|
5 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
|
Lo-Fi Version | Time is now: 18th April 2026 - 04:44 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.