Where to start Options

[leebenedi]

Hello. I have been lurking here for a few year reading posts concerning restorations, but I do not have a clear idea of where to start. My car in on the bare frame, still painted. My intention was to get it done by a professional, but the quotes gives were astronomical. It was cheaper for me to buy a fully restored one than doing this one.
I now have to do the work myself with someone that knows how to weld well.

So my question is, where do I start? Longs first, floor, front or what.

The car is resting on a small frame my dad built so that I could move it in my small garage and I will have to invest in a rotisserie eventually. I do not have a frame machine.

Thanks for the help.

[rick 918-S]

(IMG:style_emoticons/default/welcome.png) (IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif) show us what you have. Lots of members here have gone through the same thing. If you are going to do the work yourself you will need.to have some cutting and grinding equipment. Brace the door openings so the car does not sag or warp when welding. (IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif)

[mepstein]

Yes, buying a nice running car can cost a fraction of what a restoration costs. BTDT.
Metalwork can be 10-40K+
A pro paint job is $15-25K.
Engine and trans $15+
Etc.

DIY is much less expensive but you have to decide if spending hundreds of hours, Your garage space and possibly multiple years is really what you are looking for.

[Shivers]

Tools will be first. A wire feed welder that will take welding gas, can't wait for someone to come along and weld it for you, get one used that the owner will demonstrate for you that it works. It's not that hard to lay down a weld that will hold, it is that hard to lay down a weld that holds and looks good. That is why you need a mini grinder with flapper & cut off wheels. And just FYI sheet metal is not cheap, but that old washer & dryer sitting out in the street, the ones being given away are usually clad in sheet metal. Save a few cardboard boxes for making templates. And post some pics here, some people here may have just done that repair you're looking at, last week.

(IMG:style_emoticons/default/welcome.png) (IMG:style_emoticons/default/welder.gif)