![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Jake Raby |
![]()
Post
#1
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
Quite a few guys asked me to post som "In action" photos of the Pinz and I finally got to put it to a bit of a test this past weekend..
Here is a cross post from my forum for those who are interested.. Beth and decided to cruise the Pinz to circle yer wagens 22 in Sevierville TN this past weekend.. It was aboiut a 3.5 hour drive in the Pinz that was a real blast.. Crusing through the mountains listening to the sound of aircooled superiority and the tranny howling and differentials meshing was awesome! (BTW- when you can find a chick these days that will ride 3 hours+ in a rig like this while being stared at by every passer by and listen to the gears and tires howling, do without a radio or A/C and not care you know you are a very lucky man!) On the way up we got about 15 MPG! Thats pretty good for this big beast being driven at WOT across the mountains with a pretty good load.. So on the way to the show I remember that there is a tributary of the Tennessee river that goes along side the show grounds and I was already contemplating putting the pinz to its first big test since I have owned it... I get to the show and decide against the river crossing.. Then on the last day of the show an old buddy of mine says "Jake I dare ya to cross the river in that thing" and that got me thinking again.. So then I decided what the hell and went looking for a good entry point into the river... We found it and I jumped in, locked her in low range, engaged 4X4 and locked both differentials.... I walked across that river like a mountain goat! I never even spun the first tire crossing the river and even coming back up the river bank! We finished packing and drove the beast back home across the mountains and got 18 MPG on the way home! Nothing like a real 4X4 without a damn radiator.. Here are the pics It was a little swampy when I first entered the river, but that was no challenge for the Pinz! (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0069.jpg) Right about now I wondered just how deep the water was going to get.. This was only about 2 feet- nuttin to it. (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0070.jpg) This is one wide little river (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0071.jpg) After turning around here I am on the way back toward the crowd.. By this time about 40 people were watching saying "Damn, that guy is crazy" Here you can see the mad scientist behind the wheel and the MassIVe badge on the passenger side placard holder- where it belongs. (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0072.jpg) Here is the Pinz wiping his shoes off before climbing the bank out of the river bed.. (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0073.jpg) And here I am climbing about a 50 degree incline in 4X4 with the diffs locked and the engine screaming about 4500 RPM and going about 2 MPH! (IMG:http://www.aircooledtechnology.com/galleries/pinzcrossing/slides/101_0074.jpg) This is quickly becoming my favorite of all my toys, hell I think I like it better than either one of my Porsche's- perhaps thats because it even has a rifle rack from the factory! I just ordered me some new tires today for it.. the old swiss army tires are the originals from 74 and have seen better days.. The new ones are 3" taller and 2" wider than stock. Just wait till this baby gets a set of Nickies and EFI... |
Mueller |
![]()
Post
#2
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
neat...got a picture of the drivetrain?
where is the engine?? |
bondo |
![]()
Post
#3
|
Practicing my perpendicular parking ![]() ![]() ![]() ![]() Group: Members Posts: 4,277 Joined: 19-April 03 From: Los Osos, CA Member No.: 587 Region Association: Central California ![]() |
Neato! How deep can you go before it becomes *gasp* water cooled? (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|
spunone |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 945 Joined: 6-April 04 From: Anaheim CA Member No.: 1,901 Region Association: Southern California ![]() |
HA I was waiting for one of those pics where you are up to your neck in water one of those unseen drop offs (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)
|
Trekkor |
![]()
Post
#5
|
I do things... ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California ![]() |
Great!!
I want one, too. Yes, show engine pics, please... (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) KT |
ppickerell |
![]()
Post
#6
|
914 addicted ![]() ![]() ![]() Group: Members Posts: 1,679 Joined: 14-October 03 From: Pleasanton, CA. Member No.: 1,246 ![]() |
My kid lusts for a Unimog.
|
Jake Raby |
![]()
Post
#7
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
It can ford about 4' of water easily.. with the optional snorkel it can go into water about 6' deep, maybe more..
Here are a few more pics of the engine and the rest of the beast.. http://www.aircooledtechnology.com/galleri...pinz/index.html I am picking up two engines from Eurotruck in a few days and a whole load of other parts to start the engine development for the Pinz... |
spunone |
![]()
Post
#8
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 945 Joined: 6-April 04 From: Anaheim CA Member No.: 1,901 Region Association: Southern California ![]() |
Need some stacks for the carbs LOL (IMG:http://www.914world.com/bbs2/html/emoticons/happy11.gif)
|
Jake Raby |
![]()
Post
#9
|
Engine Surgeon ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States ![]() |
It uses Porsche carbs! Zenith 32 NDIX just like the pre solex 356 and 912 engines used...
No where to put stacks its all sealed up tight. |
Allan |
![]()
Post
#10
|
Teenerless Weenie ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California ![]() |
Club Vehicle...
Attached image(s) ![]() |
Aaron Cox |
![]()
Post
#11
|
||
Professional Lawn Dart ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California ![]() |
old ones aint so fun..... my unc had one... like 15 fwd gears.... slower than shit... |
||
redshift |
![]()
Post
#12
|
Bless the Hell out of you! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 ![]() |
LMAO! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
... you might not have made it, and FEMA ain't gonna save Radar's sinky army truck thing! M |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 08:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |