 locks, my exp. re-keying them |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Rocket |
 Mar 13 2006, 08:21 AM
Post
#1
|
|
VROOM VROOM  Group: Members Posts: 87 Joined: 24-August 05 From: Dunstable MA Member No.: 4,659  |
so yesterday I felt like i should make it so that my key worked on the locks in my car because i am getting a new job soon and i dont want anyone to go into it. so i took a spare key cylinder we had and re-arraged the pins so that most of them fit, and then took a dremill and grinded them all down so they were smooth. and low and behold, doing that 2 times and some spray lithium greese, and now my doors lock and i can unlock them. yay.
today i am going to do the trunk lock. -rocket |
   |
 
|
| URY914 |
Mar 13 2006, 08:36 AM
Post
#2
|
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 126,350 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Those pins are like a Rubic's cube.
You did the right thing, get it as close as you can then, file/grind it down 'till it works. Paul |
|
|
|
| Joe Ricard |
Mar 13 2006, 08:37 AM
Post
#3
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Cool, I am glad that people can do things like that AND make them work.
I'll doing this pretty soon as my (EX-CO driver) broke the key off in the ignition. (IMG:http://www.914world.com/bbs2/html/emoticons/alfred.gif) Just ordered a key blank from PP and will get this all fixed. I also "think" I have the spare key from the cool blue teener which I can re-key the racer and then have a spare. Probably a better/ smarter solution. |
|
|
|
| URY914 |
Mar 13 2006, 09:50 AM
Post
#4
|
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 126,350 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
The steering wheel lock cylinder is the same a door cylinder.
Changing them is easy. |
|
|
|
| markb |
Mar 13 2006, 10:07 AM
Post
#5
|
|
914less :( Group: Members Posts: 5,449 Joined: 22-January 03 From: Nipomo, CA Member No.: 180 Region Association: Central California 
|
The only thing I would have done differently is to take apart all of the locks, and use all of the wafers on the ignition and door locks, so that they have correct wafers. Then when you do the glove box & trunks, you can grind those to fit. Otherwise, nicely done! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 10:01 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.