![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
watsonrx13 |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
Well, a friend of mine pointed me to a red '74 914 for sale around the corner from my house. So I went by to see it. I talked with the owner, he's had it about 1 year now, but needs money. Anyway, I asked about the engine, and he says it's a 1.7l. After he swapped out the battery for a good one, he started it. It started very easily and we were going to take it around the block. When I was behind the wheel, he mentioned that there's no tag on it. Well, I'm not going to drive a red sports car in a little town without a license plate.
Anyway, here's a couple of question: 1. When I depressed the clutch, it was very easy to push, why? What's wrong? 2. The engine case had a W as the first letter, what year is the engine? 3. After seeing the pictures, what would you offer? Here's the pics: ![]() It used to have A/C, a sheet of metal was pop-riveted in place... (IMG:style_emoticons/default/sawzall-smiley.gif) ![]() The front end damage was caused by rear-ending a cop car.... (IMG:style_emoticons/default/blink.gif) ![]() |
watsonrx13 |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
Here's some more..... How's this for creative welding.... (IMG:style_emoticons/default/blink.gif) The hell hole is covered up with bondo, the engine shelf is rusted through, the battery tray is gone, underneath the longitudinal it's rusted through the floor boards...
![]() Nice single weber... (IMG:style_emoticons/default/av-943.gif) ![]() The floor boards are good, but there's water behind the seats, I think from the side windows, the rear window looks like it's been sealed recently... Oh, and the windshield has a huge spider crack in the middle of it... Also, couldn't open the front trunk from inside the car, there's a secret wire attached below the bumper.. ![]() |
watsonrx13 |
![]()
Post
#3
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
Final pics.... BTW, the other half of the rear reflector is in the passenger's seat...
![]() So, what would you offer? -- Rob |
MrKona |
![]()
Post
#4
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 597 Joined: 25-July 05 From: Santa Rosa, CA Member No.: 4,469 Region Association: None ![]() |
The engine code "W" corresponds to a '70-'71 1.7L.
Rear ended a police car? How are the brakes? (IMG:style_emoticons/default/biggrin.gif) |
Todd Enlund |
![]()
Post
#5
|
Resident Photoshop Guru ![]() ![]() ![]() ![]() Group: Members Posts: 3,251 Joined: 24-August 07 From: Laurelhurst (Portland), Oregon Member No.: 8,032 Region Association: Pacific Northwest ![]() |
|
watsonrx13 |
![]()
Post
#6
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
The engine code "W" corresponds to a '70-'71 1.7L. Rear ended a police car? How are the brakes? (IMG:style_emoticons/default/biggrin.gif) I don't know, I was scared to drive the car.... But the owner said they were 'GOOD'... (IMG:style_emoticons/default/laugh.gif) |
carr914 |
![]()
Post
#7
|
Racer from Birth ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 119,041 Joined: 2-February 04 From: Tampa,FL Member No.: 1,623 Region Association: South East States ![]() ![]() |
$12,000, the paints an 8. (IMG:style_emoticons/default/av-943.gif)
|
watsonrx13 |
![]()
Post
#8
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
Hey, it can be buffed out.... (IMG:style_emoticons/default/av-943.gif)
Also, why would the clutch go to the floor, is that an adjustment issue or a failing pressure plate? -- Rob |
r_towle |
![]()
Post
#9
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
If you can weld, go for it.
From what I can see right up front it needs the following. Suspension console Hell hole Inner fender Rear of floors both sides. Outer long Bottom of long. Clutch is the least of your worries on that one. Rich |
TravisNeff |
![]()
Post
#10
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,082 Joined: 20-March 03 From: Mesa, AZ Member No.: 447 Region Association: Southwest Region ![]() ![]() |
WTH is welded onto the suspension console?
|
Root_Werks |
![]()
Post
#11
|
Village Idiot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,337 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest ![]() ![]() |
I have 3 words for you:
"RUN FOREST RUN!" |
URY914 |
![]()
Post
#12
|
I built the lightest 914 in the history of mankind. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 121,070 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None ![]() |
Did you check behind the rockers?
|
watsonrx13 |
![]()
Post
#13
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
|
watsonrx13 |
![]()
Post
#14
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
So, nobody has any idea what the car is worth?
$1000 $800 $600 $500 Come on, somebody throw out a realistic number...... With the price of these cars going up, this could be a great parts car or project car.... BTW, I've replaced (2) suspension consoles and (2) engine shelves... -- Rob |
porschecb |
![]()
Post
#15
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,092 Joined: 13-August 04 From: Las Vegas NV Member No.: 2,529 Region Association: None ![]() |
What doe's he want for it? Start at $500 and then send him here. (IMG:style_emoticons/default/biggrin.gif)
|
Todd Enlund |
![]()
Post
#16
|
Resident Photoshop Guru ![]() ![]() ![]() ![]() Group: Members Posts: 3,251 Joined: 24-August 07 From: Laurelhurst (Portland), Oregon Member No.: 8,032 Region Association: Pacific Northwest ![]() |
Rusty tub - $300
Running 1.7 - $200 901 Side Shifter - $150 The fun you'll have - priceless. |
Cap'n Krusty |
![]()
Post
#17
|
Cap'n Krusty ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California ![]() |
As for all questions, the answer is "42". The Cap'n
|
watsonrx13 |
![]()
Post
#18
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 18-February 03 From: Plant City, FL Member No.: 312 Region Association: South East States ![]() |
As for all questions, the answer is "42". The Cap'n Thanks for all of the fish.... Thanks Cap'n..... (IMG:style_emoticons/default/laugh.gif) -- Rob |
JRust |
![]()
Post
#19
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 6,307 Joined: 10-January 03 From: Corvallis Oregon Member No.: 129 Region Association: Pacific Northwest ![]() ![]() |
I wouldn't pay more than $500 for it. That would only be if it was just around the corner. If I had to drive to see it more like $200 (IMG:style_emoticons/default/dry.gif)
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 10th June 2024 - 11:04 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |