Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Hazard button wiring question
project-914
post Jul 3 2010, 02:53 PM
Post #1


Member
**

Group: Members
Posts: 181
Joined: 2-August 06
From: Oklahoma
Member No.: 6,571



My button isn't what it should be for a 1973 US spec and I want to know if they are interchangeable

top to bottom and left to right I have
+, 15, 30...then
54f, 58b, 49a...then
two unlabeled ones



the "15" and "+" are confusing...
the pin to "54f" is absent
there is a resistor between "58b" and the switch contact if it were to be pried apart
both unlabeled switches I assume to be the "L" and "R" in the haynes diagram and that it doesn't matter which is which

any advice?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies(1 - 3)
Spoke
post Jul 4 2010, 11:28 AM
Post #2


Jerry
*****

Group: Members
Posts: 6,992
Joined: 29-October 04
From: Allentown, PA
Member No.: 3,031
Region Association: None



58b is for the illumination light on the switch. It connects to the other dash lights so at night the hazard switch is dimly lit up.

Below is the simplified schematic of the hazard switch.

My schematics do not show a "+" or 54f pin.



Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
realred914
post Jul 4 2010, 11:48 AM
Post #3


Senior Member
***

Group: Retired Members
Posts: 1,086
Joined: 1-April 10
From: california
Member No.: 11,541
Region Association: None



Me, I can't even hazard to guess on this one
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
project-914
post Jul 4 2010, 06:32 PM
Post #4


Member
**

Group: Members
Posts: 181
Joined: 2-August 06
From: Oklahoma
Member No.: 6,571



I have part number SAE QC72-3124 {411 953 235 B}

is this a correct number? It might be from another car

I think the pin coming out the side of the switch is the ground and the one labeled "+" is "49" as it is the voltage input

sound right?

thanks a ton
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 10th June 2024 - 12:06 AM