914/6 throttle linkage alternatives for carbed 3.0, What have you guys come up with instead of the stock monkey motion? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914/6 throttle linkage alternatives for carbed 3.0, What have you guys come up with instead of the stock monkey motion? |
Krieger |
Sep 5 2011, 09:04 AM
Post
#1
|
Advanced Member Group: Members Posts: 4,759 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None |
CSOB style
|
Van914 |
Sep 5 2011, 11:36 AM
Post
#2
|
Van914 Group: Members Posts: 702 Joined: 5-January 03 From: Cincinnati, Ohio Member No.: 90 Region Association: Upper MidWest |
I made a bracket from angle iron that attached to the pass side carb and used the 4 cable. Worked great.
Van |
RON S. |
Sep 5 2011, 01:09 PM
Post
#3
|
9140430841, FINALLY RUNNING Group: Members Posts: 1,212 Joined: 22-May 03 From: WALTERBORO,S.C. Member No.: 724 Region Association: South East States |
I made a cheesy little bracket to hold my cable on my 3.6
since I flipped my manifold around, I basically had to start from scratch. I fabbed up the bracket from a bicycle cable retainer if I remember, and then bought a custom length cable from Pegasus Auto Racing. All told, less than 100 bucks complete. Works like it's supposed to. Ron Attached thumbnail(s) |
Krieger |
Sep 5 2011, 08:38 PM
Post
#4
|
Advanced Member Group: Members Posts: 4,759 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None |
Nice! Van do you have any pictures?
|
AZ914 |
Sep 5 2011, 09:07 PM
Post
#5
|
914 Dumbass Group: Members Posts: 1,461 Joined: 6-January 03 From: Sunny Tucson Member No.: 98 Region Association: Southwest Region |
On my 3.2 I used the Patrick conversion cable.. it is basically just a longer cable with some heat shielding that loops up around the motor and thru the tin. It has a support that attaches to the engine/trans bolt.
|
Krieger |
Sep 6 2011, 07:45 AM
Post
#6
|
Advanced Member Group: Members Posts: 4,759 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None |
Thanks Jason, I will have to search PMSs site.
|
Lo-Fi Version | Time is now: 31st October 2024 - 05:41 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |