Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Vaccume, Routing?
akellym
post Jul 31 2004, 06:57 AM
Post #1


Eyes Of The Deep Battle
***

Group: Members
Posts: 598
Joined: 25-July 04
From: Annandale, MN
Member No.: 2,395
Region Association: Northstar Region
I am looking for a good diagram of the vacuum routing for a 73 1.7. All the ones I have found are not the best. I need to know where the two lines go for the vacuum advance one the throttle body.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
 Reply to this topicStart new topic
Replies(1 - 8)
qa1142
post Jul 31 2004, 08:49 AM
Post #2


Whiplash
***

Group: Members
Posts: 1,514
Joined: 1-June 04
From: Lake Zurich, Illinois
Member No.: 2,140
try this. Keep in mind every car may not have every hose. EGR no EGR etc.

http://www.pelicanparts.com/914/technical_...el_diagrams.htm
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
qa1142
post Jul 31 2004, 08:52 AM
Post #3


Whiplash
***

Group: Members
Posts: 1,514
Joined: 1-June 04
From: Lake Zurich, Illinois
Member No.: 2,140
I have a '74 1.8L.

The second hose from vacuum advance (actually a vacuum retard) is not there on mine. The throttle body is not even drilled for it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
wilchek
post Jul 31 2004, 12:51 PM
Post #4


Senior Member
***

Group: Members
Posts: 506
Joined: 8-June 04
From: Eastern Pennsylvania
Member No.: 2,177
If u still need it let me know, I have a 73 1.7 that I can take a pic of.

Dan
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
akellym
post Jul 31 2004, 01:43 PM
Post #5


Eyes Of The Deep Battle
***

Group: Members
Posts: 598
Joined: 25-July 04
From: Annandale, MN
Member No.: 2,395
Region Association: Northstar Region
the pelican part diagram does not show enough detail.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mike_the_man
post Jul 31 2004, 04:36 PM
Post #6


I like stuff!
***

Group: Members
Posts: 1,338
Joined: 11-June 03
From: Regina, Saskatchewan, Canada
Member No.: 809
What exactly do you need to know? On mine, which is a 74 2.0L, the advance hose is not hooked up, only the retard. I'm not sure if 73s have the advance port.

Now, the retard port is on the back of the throttle body, pointing towards the back of the trunk. It hooks up to the dizzy canister port that points towards the dizzy and battery. If there is another port on your throttle body, it hooks up to the port on the dizz that points away from the dizzy. If there is no port, just leave the advance port open to the atmosphere. Here is a pic that will hopefully help.


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
akellym
post Jul 31 2004, 04:43 PM
Post #7


Eyes Of The Deep Battle
***

Group: Members
Posts: 598
Joined: 25-July 04
From: Annandale, MN
Member No.: 2,395
Region Association: Northstar Region
I have the retard and the advance, there is hook up by the idle and one 180* the other side of the idle.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bleyseng
post Jul 31 2004, 08:01 PM
Post #8


Aircooled Baby!
**********

Group: Members
Posts: 13,036
Joined: 27-December 02
From: Seattle, Washington (for now)
Member No.: 24
Region Association: Pacific Northwest
The vacuum advance port is above the throttle plate and the retard is below the throttle plate. Actually, the hose are two sizes so look carefully at them.

Geoff
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
phantom914
post Aug 1 2004, 12:07 AM
Post #9


non-914-owner non-club member
***

Group: Benefactors
Posts: 1,013
Joined: 24-February 04
From: Covina,CA(North ofWest Covina)
Member No.: 1,708
QUOTE(Bleyseng @ Jul 31 2004, 06:01 PM)
The vacuum advance port is above the throttle plate and the retard is below the throttle plate. Actually, the hose are two sizes so look carefully at them.

Geoff

OK. I just need a little clarification. Is the retard port on the TB below the throttle plate when the throttle is closed and above it when the throttle is open?

And is the advance port above the throttle plate when the throttle is closed and below it when the throttle is open?

And what do you guys make of this: my '74 2.0, which I have had a month and I am still checking out, has both the retard and advance connected to a tee that connects to the port on the rear of the throttle body (IMG:style_emoticons/default/blink.gif) Sounds like some mechanic made a mistake. Maybe he saw the advance port on the distributor with nothing connected to it and "fixed" it?



Andrew

This post has been edited by phantom914: Aug 1 2004, 12:24 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 7th July 2025 - 12:08 AM
Invision Power Board v9.1.4 © 2025  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...