Can I put 2.0L rockers on a 1.8? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Can I put 2.0L rockers on a 1.8? |
stugray |
Jul 6 2013, 11:30 AM
Post
#1
|
Advanced Member Group: Members Posts: 3,825 Joined: 17-September 09 From: Longmont, CO Member No.: 10,819 Region Association: None |
I assume that they should fit just fine.
Stu |
stugray |
Jul 6 2013, 12:08 PM
Post
#2
|
Advanced Member Group: Members Posts: 3,825 Joined: 17-September 09 From: Longmont, CO Member No.: 10,819 Region Association: None |
I will clarify: I stole the 1.7/1.8 rockers from my running 1.8L to convert a 2.0L to the swivel feet.
Now can I put the 2.0L rockers on the 1.8L that I "raped" for it's rockers. Obviously I need to readjust the valves afterwards... Stu |
Dave_Darling |
Jul 6 2013, 12:44 PM
Post
#3
|
914 Idiot Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
Yes, you can. Since I'm a wee bit superstitious, I would consider swapping the rocker shafts and associated bits over as well as the rocker arms. Just in case the parts have "worn in" to each other.
BTW, I believe that the 1.8 and 2.0 rocker arms are the same. Only the 1.7 rocker arms are different, and that's really only in the diameter of the adjuster. --DD |
Drums66 |
Jul 6 2013, 12:54 PM
Post
#4
|
914 Rudiments Group: Members Posts: 5,321 Joined: 15-January 03 From: Coronado,Cali Member No.: 151 Region Association: Southwest Region |
Yes, you can. BTW, I believe that the 1.8 and 2.0 rocker arms are the same. Only the 1.7 rocker arms are different, and that's really only in the diameter of the adjuster. --DD .....I've done this several times with no problem's!! (IMG:style_emoticons/default/thumb3d.gif) (IMG:style_emoticons/default/bye1.gif) (IMG:style_emoticons/default/popcorn[1].gif) (IMG:style_emoticons/default/popcorn[1].gif) (IMG:style_emoticons/default/popcorn[1].gif) |
914Sixer |
Jul 6 2013, 04:34 PM
Post
#5
|
914 Guru Group: Members Posts: 8,903 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region |
Why bother, they are the same rocker assembly UNLESS someone changed them out? 1.8 & 2.0 are 10mm adjustment screws. The 1.7 is a 8mm screw. The 1.7 rocker set up is the one to use if you are going for porsche swivel rockers.
|
Lo-Fi Version | Time is now: 8th June 2024 - 12:30 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |