progress... |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
progress... |
Jeroen |
May 27 2005, 08:39 AM
Post
#1
|
914 Guru Group: Members Posts: 7,887 Joined: 24-December 02 From: The Netherlands Member No.: 3 Region Association: Europe |
visited the bodyshop today...
didn't take too many pics cause the battery of my camera died on me (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) I'll have to go back next week and shoot some more Not too visible in these shots is the new inner half longitudinal that's welded in (driver side) (you can see some of it in pic 4 & 5) Sadly, I don't think the welder understood the concept of the stampings in the driver side inner rear fender (mounting positions for the oil tank - pic 1) The PO made some crappy repairs there so I got a replacement panel (thanks again Larry / Spare-time-toys) But he still welded some additional metal over it... I don't think the /6 oil tank will fit this way I'll have to talk to him about that (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif) I'm very happy with the other repairs (IMG:http://www.914world.com/bbs2/html/emoticons/boldblue.gif) (IMG:http://www.914world.com/bbs2/uploads/blog-1117203939.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117203955.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117203974.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117203986.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117204011.jpg) |
xsboost90 |
May 27 2005, 08:41 AM
Post
#2
|
Senior Member Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432 |
awsome! I know when mine was there i was wishing someone would do it for me.
|
Jacco |
May 27 2005, 09:26 AM
Post
#3
|
Designated Dutchman Group: Members Posts: 194 Joined: 23-February 04 From: the Netherlands Member No.: 1,703 Region Association: Europe |
Lookin good! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
hope you'll get the holes for the oiltank figured out. give me a holler if you need any help in the near future. Wish I had the teener in Delft, the weather is unbelievable! have a cold one (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) I know I will greets Jacco |
partsman |
May 27 2005, 11:52 AM
Post
#4
|
forever hooked Group: Members Posts: 276 Joined: 27-February 04 From: Bradford, MA Member No.: 1,726 Region Association: North East States |
jeroen, My cousion and her better half are coming over to Boston tomorrow for a week and a half..is there anything I could get for you with the great exchange rate right now for you and have them bring it back over?
I work at a Porsche dealership, and my cuz lives in Amsterdam...actually, my mom's sides of the family is all over there..she was born and raised in Rotterdam. I can't keep track of all the cousins..they either live in Amsterdam or Norweijk (sp?)...in the north where Heinekin's house is..you know the one with the green roof. Anyway...just thought I'd mention it Eric |
Gint |
May 27 2005, 01:09 PM
Post
#5
|
Mike Ginter Group: Admin Posts: 16,083 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
That's good looking work Jeroen. Finally bit the bullet and getting her finished eh?
|
maf914 |
May 27 2005, 01:49 PM
Post
#6
|
Not a Guru! Group: Members Posts: 3,049 Joined: 30-April 03 From: Central Florida Member No.: 632 Region Association: None |
You gotta love shiny new metal! (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)
Way to go, Jeroen. (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) |
turbo914v8 |
May 27 2005, 02:04 PM
Post
#7
|
Member Group: Members Posts: 373 Joined: 26-July 03 From: Canada Member No.: 952 |
Looks great did you have your chasse media blasted? If so what media did you use.
Regards, Turbo Paul |
brant |
May 27 2005, 02:18 PM
Post
#8
|
914 Wizard Group: Members Posts: 11,641 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
This is really... Really... great!
brant |
Bleyseng |
May 27 2005, 04:12 PM
Post
#9
|
Aircooled Baby! Group: Members Posts: 13,035 Joined: 27-December 02 From: Seattle, Washington (for now) Member No.: 24 Region Association: Pacific Northwest |
Wow. looks good! Haha, next time you come back from vacation, charge the camera batteries.
Jacco, you missed out on the weather in Seattle as its 85-90 degrees these days!! Looks like we might be going the Nederlands in Oct for a visit so I can also bring parts to you. |
rick 918-S |
May 27 2005, 05:31 PM
Post
#10
|
Hey nice rack! -Celette Group: Members Posts: 20,494 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region |
|
Jeroen |
May 27 2005, 05:35 PM
Post
#11
|
||||
914 Guru Group: Members Posts: 7,887 Joined: 24-December 02 From: The Netherlands Member No.: 3 Region Association: Europe |
Eric, thanks for the offer...
Due to the crappy vacation, the 914 parts budget is kinda limited right now (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) I live about 30 min. south east of Rotterdam (I was born there too) Geoff, Jacco doesn't have to worry about the Seattle weather now I broughts some nice hot weather with me when I returned from Cyprus (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)
Yep, I was sick 'n tired of this thing going nowhere...
Just a regular sandblast... |
||||
Thorshammer |
May 27 2005, 05:54 PM
Post
#12
|
Senior Member Group: Members Posts: 749 Joined: 11-November 03 Member No.: 1,335 |
Hey Partsman (Eric)
Can you give me the hookup for the oem stuff I need for my racecar. I live in SE mass and am tired of getting porked. Only need gaskets and so forth. Erik Madsen |
Bleyseng |
May 27 2005, 06:07 PM
Post
#13
|
||
Aircooled Baby! Group: Members Posts: 13,035 Joined: 27-December 02 From: Seattle, Washington (for now) Member No.: 24 Region Association: Pacific Northwest |
I see its 84 degrees there, wow. When Jacco was here it was raining......it sucked. yeah, yeah, cry me a river. You just got back from Cyprus. boo hoo. swimming everyday, looking at all the topless women...rough vacation buddy. I am trying to pay for both the 914 and the Westy repairs right now. (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif) But the basement family room is done! Should be ready for your visit. |
||
Allan |
May 27 2005, 06:58 PM
Post
#14
|
||
Teenerless Weenie Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California |
Which side??? Turkish or Greek? Nice place... |
||
Jacco |
May 28 2005, 06:49 AM
Post
#15
|
||
Designated Dutchman Group: Members Posts: 194 Joined: 23-February 04 From: the Netherlands Member No.: 1,703 Region Association: Europe |
weather is certainly gud these days, had a nice BBQ last night (first of the dutch season for me) I'll have a look for parts I need, I'm actually looking for some stainless heat exchangers, but those wouldn't really fit cary on I guess (IMG:http://www.914world.com/bbs2/html/emoticons/blink.gif) I'm going to enjoy the sun, hope you do the same Jeroen! greets Jacco |
||
Jeroen |
May 30 2005, 11:41 AM
Post
#16
|
914 Guru Group: Members Posts: 7,887 Joined: 24-December 02 From: The Netherlands Member No.: 3 Region Association: Europe |
Ok, so I went back to day with a fully loaded battery (IMG:http://www.914world.com/bbs2/html/emoticons/rolleyes.gif)
First 2 pics show the outer half of the drivers side longitudinal removed As you can see, the support plate underneath the doorjamb/windshield frame in the middle of the long has been replicated Pic 3 shows the replacement piece for the outer long half, about ready to be welded in Pic 4 shows the new inner half of the long the cut-out for the handbrake won't be there anymore planning for a handbrake handle on the center tunnel 5th pic shows a new "Y" piece from the inner long to the bottom of the firewall on the pass side Also some of the DAPO crappy repairs (IMG:http://www.914world.com/bbs2/html/emoticons/barf.gif) (will be fixed later) 6th pic shows the same part on the drivers side last pic shows the sawzall part from Larry welded in to place also the bottom corner at the firewall has been patched (looks funny in the pic, but it's done nicely) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474069.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474079.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474093.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474100.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474137.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474155.jpg) (IMG:http://www.914world.com/bbs2/uploads/blog-1117474167.jpg) |
J P Stein |
May 30 2005, 12:08 PM
Post
#17
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Yaroon:
Somewhere in my pile of shittage I have a paper template of the hole layout for the stock tank. You're welcome to it....if you feel the need. |
neo914-6 |
May 30 2005, 04:36 PM
Post
#18
|
neo life Group: Members Posts: 5,086 Joined: 16-January 03 From: Willow Glen (San Jose) Member No.: 159 |
nice flintstone car! (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) '
Looking good (IMG:http://www.914world.com/bbs2/html/emoticons/clap.gif) |
spare time toys |
May 30 2005, 06:50 PM
Post
#19
|
hooked on grilling food. Group: Members Posts: 4,059 Joined: 3-April 04 From: West Plano Tx Member No.: 1,884 Region Association: Southwest Region |
So looking at the first batch it looks like the guy welded patches on the backside of what I sent you (IMG:http://www.914world.com/bbs2/html/emoticons/confused24.gif) It looks good in there though. (IMG:http://www.914world.com/bbs2/html/emoticons/clap.gif)
|
Jeroen |
May 30 2005, 08:16 PM
Post
#20
|
||
914 Guru Group: Members Posts: 7,887 Joined: 24-December 02 From: The Netherlands Member No.: 3 Region Association: Europe |
yep, that's what he did... dunno why either (haven't talked to him about it, he wasn't there when I was) the tank ain't gonna fit like this, that's for sure (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif) I'm not quite sure if I'm gonna use my stock /6 tank or go for a front mounted tank, but I wanna keep my options open JP, if I go for the stock /6 tank, I'll keep you up on your offer! |
||
Lo-Fi Version | Time is now: 11th June 2024 - 01:51 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |