![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
-JR- |
![]()
Post
#1
|
Life goes faster at 150MPH ![]() ![]() Group: Members Posts: 276 Joined: 12-May 04 From: Victoria BC Canada Member No.: 2,055 ![]() |
I really like this color and trying to find out more than just "grey".
https://bringatrailer.com/listing/1974-porsche-914-46/ (IMG:http://www.914world.com/bbs2/uploads_offsite/bringatrailer.com-2055-1675911531.1.jpg) |
![]() ![]() |
datapace |
![]()
Post
#2
|
Member ![]() ![]() Group: Members Posts: 134 Joined: 19-January 04 From: Atlanta, GA Member No.: 1,579 Region Association: South East States ![]() ![]() |
Not sure who built it, but it says the color is Chalk/Crayon (M9A) in the description.
|
Craigers17 |
![]()
Post
#3
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 844 Joined: 5-August 17 From: Rome, GA Member No.: 21,317 Region Association: South East States ![]() ![]() |
Here's his build thread:
http://www.914world.com/bbs2/index.php?sho...=348567&hl= Per his post in the thread: "Body rec'd 2 coats of Nason high build primer, 3 coats Axalta Challenger base (Porsche Chalk/Crayon) and 4 coats of clear. " |
Superhawk996 |
![]()
Post
#4
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,050 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch ![]() ![]() |
There has to be a heck of a back story on how that went from excitement to sold in just a couple months!
|
jvmarino |
![]()
Post
#5
|
Member ![]() ![]() Group: Members Posts: 98 Joined: 22-March 09 From: Baltimore Member No.: 10,188 Region Association: None ![]() |
I just looked over the BAT pictures and think while this car looks nice at first glance, it seems like someone spent a lot of time to make it look pretty but made some decisions on the job that don't make sense. The engine compartment looks a bit rough, they left off both front and rear valances, and the front has no plugs in the bulkhead holes, so air and water will just be blown into the front trunk with gusto. The muffler is missing most of the bolts that attach it to the heat exchangers and it isn't even attached to the support bracket. These are simple things that are missing which may indicate that someone just tried to wrap things up quickly to sell. Who knows what other short cuts were taken. Thankfully the buyer didn't pay some crazy high BAT price for the car.
|
NARP74 |
![]()
Post
#6
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,370 Joined: 29-July 20 From: Colorado, USA, Earth Member No.: 24,549 Region Association: Rocky Mountains ![]() |
Probably got in too deep and had to bail, could be a ton of reasons. Agree with the hasty assembly. Seems to lean as well, setup and ride height not finished. That was a while ago, hopefully all is completed now.
|
Root_Werks |
![]()
Post
#7
|
Village Idiot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,668 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest ![]() ![]() |
I really like this color and trying to find out more than just "grey". https://bringatrailer.com/listing/1974-porsche-914-46/ I was thinking Audi Nardo Grey, but that's a little dark. I swear VW/Audi has a grey that looks just like that. |
Blown59 |
![]()
Post
#8
|
Member ![]() ![]() Group: Members Posts: 70 Joined: 21-July 19 From: St Louis Member No.: 23,315 Region Association: None ![]() |
There has to be a heck of a back story on how that went from excitement to sold in just a couple months! Not a huge backstory... I just really enjoy briging my visions to life. This was the very first car I did major metal fabrication on (cutting and welding the fenders) as well as a full body base/clear paint job with a compressor and spray gun. Prior to this, the most I had ever done was a little welding of some exhaust components and grafting in a small panel on another car. Any paint work had been a rattle can, blend and sanded. This was a pretty big project and undertaking. One I was quite proud of. Not perfect, but far better than many, many other novices out there. I just looked over the BAT pictures and think while this car looks nice at first glance, it seems like someone spent a lot of time to make it look pretty but made some decisions on the job that don't make sense. The engine compartment looks a bit rough, they left off both front and rear valances, and the front has no plugs in the bulkhead holes, so air and water will just be blown into the front trunk with gusto. The muffler is missing most of the bolts that attach it to the heat exchangers and it isn't even attached to the support bracket. These are simple things that are missing which may indicate that someone just tried to wrap things up quickly to sell. Who knows what other short cuts were taken. Thankfully the buyer didn't pay some crazy high BAT price for the car. The engine compartment was never touched, nor was the exhaust. The engine and its components are exactly as the car was when I bought it from previous owner in Kentucky. The only thing I did was change the oil and gear oil. No short cuts taken in my work. The lack of valances was my own personal liking and part of the restomod look I wanted.It was sold with the intention of whoever bought it would complete and finish it to their liking. It was well known the engine wasnt rebuilt or reworked in any way. Probably got in too deep and had to bail, could be a ton of reasons. Agree with the hasty assembly. Seems to lean as well, setup and ride height not finished. That was a while ago, hopefully all is completed now. Again, nothing hasty about what I did with this vehicle. I have many, many photos documenting the build. All the work from the teardown of the suspension components, the steering rack refurbish, the rear hubs, axles, trailing arms, everything I touched. Im not a professional, just a hobbyist and enjoy what I do. I cant afford to keep everything I do. Sometimes you have to part with things to carry on other visions, projects and wants. |
Lucky9146 |
![]()
Post
#9
|
Always Wanted A Bigger Go Cart ![]() ![]() ![]() Group: Members Posts: 1,676 Joined: 22-September 14 From: Poway California Member No.: 17,942 Region Association: Southern California ![]() ![]() |
@Blown59
Great explanation of your build and responses to comments made in this thread. Thanks for taking the time. I took a look at your build thread and you did a lot of work on your garage build, you should be proud. Car looked great! Comments really supported your efforts at the time of your build as well, and even dr914 weighed in saying "very Tasteful". Looks like you handled the BAT auction well too, not an easy thing to do. Hopefully you have another coming along as you acquired some skills. (IMG:style_emoticons/default/driving.gif) (IMG:style_emoticons/default/white914.jpg) |
Craigers17 |
![]()
Post
#10
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 844 Joined: 5-August 17 From: Rome, GA Member No.: 21,317 Region Association: South East States ![]() ![]() |
@Blown59 Great explanation of your build and responses to comments made in this thread. Thanks for taking the time. I took a look at your build thread and you did a lot of work on your garage build, you should be proud. Car looked great! Comments really supported your efforts at the time of your build as well, and even dr914 weighed in saying "very Tasteful". Looks like you handled the BAT auction well too, not an easy thing to do. Hopefully you have another coming along as you acquired some skills. (IMG:style_emoticons/default/driving.gif) (IMG:style_emoticons/default/white914.jpg) (IMG:style_emoticons/default/agree.gif) I really enjoyed this build and the BAT auction. I really like the color combo as well. I hope he doesn't mind me posting this, but he's already done another 914 with another BAT auction here: https://bringatrailer.com/listing/1971-porsche-914-22/ |
Blown59 |
![]()
Post
#11
|
Member ![]() ![]() Group: Members Posts: 70 Joined: 21-July 19 From: St Louis Member No.: 23,315 Region Association: None ![]() |
@Blown59 Great explanation of your build and responses to comments made in this thread. Thanks for taking the time. I took a look at your build thread and you did a lot of work on your garage build, you should be proud. Car looked great! Comments really supported your efforts at the time of your build as well, and even dr914 weighed in saying "very Tasteful". Looks like you handled the BAT auction well too, not an easy thing to do. Hopefully you have another coming along as you acquired some skills. (IMG:style_emoticons/default/driving.gif) (IMG:style_emoticons/default/white914.jpg) (IMG:style_emoticons/default/agree.gif) I really enjoyed this build and the BAT auction. I really like the color combo as well. I hope he doesn't mind me posting this, but he's already done another 914 with another BAT auction here: https://bringatrailer.com/listing/1971-porsche-914-22/ Thank you gentlemen, much appreciated. The projects following those two 914s were not 914's... I did a 65 Mustang coupe with a built 289 transplant. Dropped the c4 Auto for a T-5 and added a hydraulic clutch and 5lug conversion with a 8.8 rear from a Thunderbird turbo coupe and of course... Flares. Then bought and flipped a few Boxsters, retaining one for myself. I recently built a house and a new garage to allow me to grow my hobbies. I just recently acquired a 1970 signal orange 914 which will be the next project. I will start a new thread with pics and progress once the car is in my possession |
Root_Werks |
![]()
Post
#12
|
Village Idiot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,668 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest ![]() ![]() |
Welcome back!
Be more than curious what you do with the 1970 914. |
Blown59 |
![]()
Post
#13
|
Member ![]() ![]() Group: Members Posts: 70 Joined: 21-July 19 From: St Louis Member No.: 23,315 Region Association: None ![]() |
|
worn |
![]()
Post
#14
|
Winner of the Utah Twisted Joint Award ![]() ![]() ![]() ![]() Group: Members Posts: 3,473 Joined: 3-June 11 From: Madison, WI Member No.: 13,152 Region Association: Upper MidWest ![]() ![]() |
I am thinking it would probably make sense not to drive it home.
|
KELTY360 |
![]()
Post
#15
|
914 Neferati ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,130 Joined: 31-December 05 From: Pt. Townsend, WA Member No.: 5,344 Region Association: Pacific Northwest ![]() ![]() |
Yabba dabba doo!
Good luck with the build. |
jim_hoyland |
![]()
Post
#16
|
Get that VIN ? ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 9,700 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California ![]() ![]() |
Thanks for sharing ! (IMG:style_emoticons/default/smile.gif)
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 12th May 2025 - 08:41 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |