 Adjusting closed height, DS window |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jnaughton |
 Aug 22 2005, 05:43 AM
Post
#1
|
|
Newbie  Group: Members Posts: 12 Joined: 30-May 05 From: pittsburgh PA Member No.: 4,166  |
This has probabply been covered before, but how to adjust window so it meets the seal ?
JN |
   |
 
|
  |
Replies(1 - 3)
| mihai914 |
Aug 22 2005, 06:28 AM
Post
#2
|
|
Senior Member Group: Members Posts: 800 Joined: 2-March 05 From: Montreal, QC Member No.: 3,697 Region Association: None 
|
Is it a early 70-72 car or later because the doors were different.
If it's a later door, when you remove the panel, you will see on the window mechanism a 10mm bolt acting as a stopper for height and that you can play with. I think it,s covered in every reference manual such as the Haynes. If it's early, sorry I don't know, but someone will. |
|
|
|
| jnaughton |
Aug 22 2005, 01:06 PM
Post
#3
|
|
Newbie Group: Members Posts: 12 Joined: 30-May 05 From: pittsburgh PA Member No.: 4,166 |
It is a '74
JN |
|
|
|
| bd1308 |
Aug 22 2005, 01:12 PM
Post
#4
|
|
Sir Post-a-lot Group: Members Posts: 8,020 Joined: 24-January 05 From: Louisville,KY Member No.: 3,501 |
it's the late door then...
take the door pocket off, pull the plastic off of the window handle, unscrew the screw, pull the crank, pull the pad (carefully--there are plastic tab thingies that could get pulled out of the board) and you'll see the 8mm (or 10mm) bolt upside down...actually i believe it's double nutted, you can't miss it... use the crank to lower and raise the window.... while you're in there, i did some lubing of the track and what-not with some lithium grease.... OH and check the plastic door cam... |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 09:20 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.