 'Ultimate LED' gauge restoration, 'Free Stuff' promotion is over...Free Shipping is in! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| gtbarnes |
 Mar 8 2025, 08:58 AM
Post
#1
|
|
Newbie  Group: Members Posts: 28 Joined: 9-July 13 From: nash,tn Member No.: 16,111 Region Association: South East States  |
Link was old sorry...try this https://gtbarnes914.com
Thx to everyone who ordered one! Waiting to see your install pics! Every wire and COB led strip is cut to perfect length for even and equal lighting across the graduations and exact brightness in each gauge. , everything soldered, quality quick connect and SS ground. 2connections: 1/4 spade for fuse panel & 1 loop for ground. The lighting and installation cannot be better or quicker. its a well thought out package to be the best lighting there ever will be for the 914 gauges with lifetime service. These leds work best at at about half of the 12v input which should make them last forever and the plug in dimmer was chosen to easily get replaced if it were to ever fail. If you have not seen this exact package work in person, you have not seen any that actually got it right. Light is put where it should be, not glaring has excellent adjustability and all 3 gauges are equal brightness! Comes with bright florescent paint and new color lens filters  |
   |
 
|
  |
Replies(1 - 1)
| gtbarnes |
Mar 30 2025, 10:07 PM
Post
#2
|
|
Newbie Group: Members Posts: 28 Joined: 9-July 13 From: nash,tn Member No.: 16,111 Region Association: South East States |
https://gtbarnes914.com
Thx to everyone who ordered one! Waiting to see your install pics! You can run all over the internet looking for components to try to duplicate this kit, but you wont come out cheaper. This glass is expensive and quite rare in the us because it no longer has commercial applications in the needed thickness. It is also more difficult to cut than clear glass to get 'lens quality' circles. Even a pro cutter will break or badly chip some. I offer this to bring attention to other cool offers I have in the making. Thank you for your interest!   Free stuff promotion is over...free shipping is in! 4/18 25 |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd May 2025 - 02:06 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.