Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> In dire need of weber IDF part!!!, fuel enrichment circuit piece....
Aaron Cox
post Apr 8 2006, 07:35 PM
Post #1


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
huge thanks to brad/clayton/kevin/joer

well, brad rocks (we knew that)

everyone said when you remove the choke/fuel enrichment circuit, you pull the 2 little springed psitons inside...

WRONG. there are like 15 types of IDF's, and if yours came with chokes, all the choke passages are drilled.....


i need this part badly! my car was a fuel pump.... must have been 1:1 AFR.......

oil change here we come.....


I NEED THIS PART BY SATURDAY !!! PLEASE HELP! ANYONE HAVE PARTS CARBS????


I Mostly just need the "spring clip" at the top, but will take it all if you got it.

Aaron Cox
acox914@comcast.net



Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
2 Pages V  1 2 >  
 Reply to this topicStart new topic
Replies(1 - 19)
r_towle
post Apr 8 2006, 07:48 PM
Post #2


Custom Member
***************

Group: Members
Posts: 24,705
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
I have it.

Show me the exact part.

Or tell me the number...

Or better yet, take a pic.

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 08:03 PM
Post #3


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
i really need at least 1 #61....

and the springs...... under them
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post Apr 8 2006, 08:08 PM
Post #4


Custom Member
***************

Group: Members
Posts: 24,705
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
I have two parts 44 IDF Carbs...

Is it the same part?

If so, its there...I will go check...

Meanwhile..think about this..

My tranny.. (In PM) I need to put a stock fifth in there...

Look at the gears again and tell me what my shifting will look like...4th-5th...I mean to ask,,,is it doable...

I will go out and look now..

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 08:14 PM
Post #5


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
compyter hard drive got erased by boneheads at bsetbuy....

im trying to find all the files (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif)


ill post a thread...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
morph
post Apr 8 2006, 08:18 PM
Post #6


quality parts builder
***

Group: Members
Posts: 1,828
Joined: 25-November 03
From: oregon coast
Member No.: 1,389
Region Association: Pacific Northwest
sorry i never got back to you been real busy
i got the parts you need a can go out mon
pm me if ya still need em
james
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post Apr 8 2006, 08:21 PM
Post #7


Custom Member
***************

Group: Members
Posts: 24,705
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
I got nothing...and its really cold out.

I looked, no part there...

My carbs where empty, and the parts box does not have that part...sorry...

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 08:23 PM
Post #8


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (r_towle @ Apr 8 2006, 07:21 PM)
I got nothing...and its really cold out.

I looked, no part there...

My carbs where empty, and the parts box does not have that part...sorry...

Rich

yours werent drilled for them then.... (same assumption i made)

THANKS for looking tho!!!

rich - im tryin to find someone i emailed the gear files too,,,,
AA

morph, PMsent
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post Apr 8 2006, 08:25 PM
Post #9


Custom Member
***************

Group: Members
Posts: 24,705
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
If you are trying to stop the flow...try jbweld...

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MattR
post Apr 8 2006, 10:49 PM
Post #10


Advanced Member
****

Group: Members
Posts: 3,279
Joined: 23-January 04
From: SF Bay Area
Member No.: 1,589
Region Association: Northern California
Wow man, I'm really sorry about this aaron. I know I told you this. I searched my carbs up and down witha flashlight and couldnt find any passage holes from the choke bowl...

(IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 10:55 PM
Post #11


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (MattR @ Apr 8 2006, 09:49 PM)
Wow man, I'm really sorry about this aaron.  I know I told you this.  I searched my carbs up and down witha  flashlight and couldnt find any passage holes from the choke bowl...

(IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif)

hey no prob- you didnt know, neither did i, neither did clayton...scott, etc

i called and checked with 8 other people.... they all said "pull em"

brad said nope! if yours were drilled and arrived with a choke - you need em.....

so does bob tomlinson manual...


right bank has an OEL problem now. burning oil ((IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) ) take your guess...im hoping for C!
A ) broke a ring, needs rings
B ) needs balve guides
C ) from running so rich, we could have washed all the oil off the cylinder walls. hello honing.

lots of gas in the oil, needs to be drained and we will go from there (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

it was the only thing that changed from when i drove in, and when i drove out. took us 30 hours to figger it out (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MattR
post Apr 8 2006, 10:56 PM
Post #12


Advanced Member
****

Group: Members
Posts: 3,279
Joined: 23-January 04
From: SF Bay Area
Member No.: 1,589
Region Association: Northern California
Good thing the rings were seated......
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 10:57 PM
Post #13


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (MattR @ Apr 8 2006, 09:49 PM)
Wow man, I'm really sorry about this aaron. I know I told you this. I searched my carbs up and down witha flashlight and couldnt find any passage holes from the choke bowl...

(IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif)

oh, and the thing really doesnt have anything to do with the bowls. it bleeds off extra air to atmospere, air taht would be going into your engine, thus richening up the mixture, thus used for cold star enrichment (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
craig downs
post Apr 8 2006, 11:33 PM
Post #14


Senior Member
***

Group: Members
Posts: 769
Joined: 25-November 05
From: mira loma ca.
Member No.: 5,189
Region Association: Southern California
Hey Aaron
I got some 40 IDF around that have the things you need .
I can drop them off tomorrow
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rhodyguy
post Apr 8 2006, 11:39 PM
Post #15


Chimp Sanctuary NW. Check it out.
***************

Group: Members
Posts: 22,240
Joined: 2-March 03
From: Orion's Bell. The BELL!
Member No.: 378
Region Association: Galt's Gulch
interesting aaron. is there no way to undo the passageways that i presume have been opened up?

k
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 11:41 PM
Post #16


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (craig downs @ Apr 8 2006, 10:33 PM)
Hey Aaron
I got some 40 IDF around that have the things you need .
I can drop them off tomorrow

I would only accept them if these were junk carbs... why take a set outta comission to make another work?


if thats the case....
you sure it has them inside? snap a quick pick to be sure?

if so - taht would be excellent!

i can cancel my paypal to morph it his works out.

thanks craig!

AA
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 11:41 PM
Post #17


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (rhodyguy @ Apr 8 2006, 10:39 PM)
interesting aaron. is there no way to undo the passageways that i presume have been opened up?

k

plug them, or leave the pistons in.....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rhodyguy
post Apr 8 2006, 11:43 PM
Post #18


Chimp Sanctuary NW. Check it out.
***************

Group: Members
Posts: 22,240
Joined: 2-March 03
From: Orion's Bell. The BELL!
Member No.: 378
Region Association: Galt's Gulch
can you post some pictures of 54 thru 61? i've only seen the assem while attached. the back side specificly.

k
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rhodyguy
post Apr 8 2006, 11:45 PM
Post #19


Chimp Sanctuary NW. Check it out.
***************

Group: Members
Posts: 22,240
Joined: 2-March 03
From: Orion's Bell. The BELL!
Member No.: 378
Region Association: Galt's Gulch
plugs=cover plates and pistons=leave the assem in place i guess.

k
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Apr 8 2006, 11:50 PM
Post #20


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: Corona, CA
Member No.: 219
Region Association: Southern California
QUOTE (rhodyguy @ Apr 8 2006, 10:45 PM)
plugs=cover plates and pistons=leave the assem in place i guess.

k

i can snap some pics later......

tomlinson says, pull the mechanism (big part 54 (55 is an airintake screen)) and leave the arts 57-61 alone! just put a block off plate in palce of 54....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

2 Pages V  1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 9th May 2025 - 09:52 AM
Invision Power Board v9.1.4 © 2025  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...