 '74 Engine/Tranny into a '71 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RD Evans |
 Feb 21 2004, 02:38 PM
Post
#1
|
|
Member  Group: Members Posts: 112 Joined: 20-July 03 From: Temple, TX Member No.: 923  |
Will a 1.8 and side shift tranny from a '74 bolt into a '71 car? Any issues to be aware of?
Thanks- |
   |
 
|
  |
Replies(1 - 4)
| tat2dphreak |
Feb 21 2004, 02:49 PM
Post
#2
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region  |
sure, change the engine mount bar with it and voila... not much else that I know of for tricks... I think it's plug -n- play!
|
|
|
|
| McMark |
Feb 21 2004, 03:25 PM
Post
#3
|
|
914 Freak! Group: Retired Admin Posts: 20,180 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None |
And shift linkage.
|
|
|
|
| tat2dphreak |
Feb 21 2004, 04:28 PM
Post
#4
|
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
you WILLL need a special bushing for fitting the shift linkage to the firewall too...
|
|
|
|
| Dave_Darling |
Feb 21 2004, 11:45 PM
Post
#5
|
|
914 Idiot Group: Members Posts: 15,204 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
If you want to use the 1.8's fuel injection, you will need all of the FI parts. In addition to the obvious ones, you will need the "dual relay" and the resistor pack. Botyh of these hang off of the battery tray, I believe.
In addition to the motor mount bar from the later car, you will also need the solid outboard mounts, the rubber inboard mounts, and the metal brackets for the latter from the late car. --DD |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th July 2025 - 07:56 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.