1.8 not running right, need help., after Petronix install, uninstall. Update - running! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
1.8 not running right, need help., after Petronix install, uninstall. Update - running! |
Cevan |
Mar 26 2008, 08:14 PM
Post
#1
|
Senior Member Group: Members Posts: 1,079 Joined: 11-December 06 From: Western Massachusetts Member No.: 7,351 |
I had gotten a Petronix electronic ignition module (1847V). Prior to installing it, the car had been running great with the points (I know, should have left well enough alone). I installed it per the instructions and cranked the motor over but nothing. I checked all my connections and cranked it over again and nothing. So I removed it and put the points back on.
When I go to start it, it seems that only 2 of the cylinders are firing. It was definitely idling low. My CHT gauge never really moved (it's on #3) so I suspect that 3 and possibly 4 are not firing. I drove it about 1/4 mile and no power. Could I have flooded 3 and 4 when I had the Petronix unit on? I'm going to let the car sit overnight and try it again in the morning. Could I have damaged something with the Petronix unit? |
ClayPerrine |
Mar 28 2008, 01:28 PM
Post
#2
|
Life's been good to me so far..... Group: Admin Posts: 15,540 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille |
The L-Jet system is fairly simple and reliable. If you didn't monkey with the injection, you are barking up the wrong tree.
And Slits, if the resistor pack has a broken wire, the injector will not trigger. His problem is flooding, so the injector has to be triggering. Did you remove the plug wires from the cap when you had it off to change the points? If so, you may have crossed some wires. Recheck the firing order. Also, check to make sure the white wire from the injection is hooked to the same side of the coil as the green wire from the points. |
Lo-Fi Version | Time is now: 16th June 2024 - 04:58 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |