Help me sort out my engine, My combo is not working and needs to be revised Options

[Phoenix914]

I recently had my 914 emissions tested and it failed. Yes, in Delaware all cars newer than 1969 have to pass emissions. Anyway, this failure brought to my attention that the combination of engine specs and fuel injection are causing this problem. I had an enlightening conversation with Jake Raby about what I had and he basically said that the reason for the emissions problem is that the cam I have is too radical for D-jet. He said he was surprised it ran at all. It does, but has no guts after 4k RPM.

So here is what I have:

The engine was rebuilt 20 years ago after some sort of catastrophic failure. It was originally a 2.0, and is now a 2056. The cam is listed on the paperwork as 272 degree. Jake said this is pretty radical for a 2056. The original owner told me he used to have dual carbs on the car, but decided to put the D-jet back on because of emissions. Ha!

I was already planning to do some upgrades to the valve train because it is seriously noisy. The rocker arm springs must be getting shoved around too much by that cam. Solid rocker spacers and possibly 911 adjusters/1.7 rockers were on my to-do list anyway. So what I need to decide is which way to go with reconfiguring this combo. I could pull off the D-jet and throw some gnarly Webers on, or possibly an updated injection system. Or, I could crack open the case and replace the cam with something milder that will work with D-jet.

This is just a daily driver type car. I want something that works, is fairly reliable, and won't require too much tinkering. At least, not any more than one would expect for a 35 year-old car. I also want to keep the budget for this operation at a minimum.

What to do...? (IMG:style_emoticons/default/confused24.gif)

[Jake Raby]

Our forums are open to anyone, you don't have to be a purchaser.. We do have some private forums that can only be seen by the purchasers of complete engines and kits, but most all info there is open..

Yes, you have a misconfiguration- no doubt. the best way to remedy it is to redesign the engine, not the cheapest, but the most effective means of having real fun with your car..

[Phoenix914]

Our forums are open to anyone, you don't have to be a purchaser.. We do have some private forums that can only be seen by the purchasers of complete engines and kits, but most all info there is open..

Yes, you have a misconfiguration- no doubt. the best way to remedy it is to redesign the engine, not the cheapest, but the most effective means of having real fun with your car..

I'll be calling you soon, Jake. Thanks again for your advice last week. Looks like I have a summer project now.