 spring info, lb rating |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rhodyguy |
 Mar 24 2003, 07:40 AM
Post
#1
|
|
Chimp Sanctuary NW. Check it out.  Group: Members Posts: 22,085 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch  |
my picture shows 2 setups. the reds came on a parts car i bought. the ones on the kyb's are stock (3 paint marks on each). the ones on the koni's have a smaller gap between the coils at the top and they are approx 5/16" in dia (+), they have a silver paint mark that runs the length of the spring. the coils on the kybs have the same spacing and they are about 1/4 " in dia. are the ones on the reds considered progressives and does anybody have any idea what the lb rating might be?
|
   |
 
|
  |
Replies
| Zeke |
Mar 24 2003, 07:54 PM
Post
#2
|
|
Never left, but not right.... Group: Members Posts: 381 Joined: 26-January 03 From: Long Beach CA Member No.: 197 Region Association: None |
QUOTE(rhodyguy @ Mar 24 2003, 05:40 AM) my picture shows 2 setups. the reds came on a parts car i bought. the ones on the kyb's are stock (3 paint marks on each). the ones on the koni's have a smaller gap between the coils at the top and they are approx 5/16" in dia (+), they have a silver paint mark that runs the length of the spring. the coils on the kybs have the same spacing and they are about 1/4 " in dia. are the ones on the reds considered progressives and does anybody have any idea what the lb rating might be? The top one "looks" stock, 100# or so. teh bottom one is a progressive. No idea what #. As far as 180s being 140s, are you subtracting the begining fraction of a coil at each end to compensate for "dead coils?" You may be taking off too much. There is very little physical difference between 180# and 140#. |
|
|
|
Posts in this topic
rhodyguy spring info Mar 24 2003, 07:40 AM
Bleyseng Remember to fill in your location, dude.
Sorry, I ... Mar 24 2003, 08:29 AM Mueller I just measured my springs last night...first set ... Mar 24 2003, 11:37 AM Mueller QUOTE
rhodyguy geoff, under the radar here. i'm the dope in t... Mar 25 2003, 07:42 AM
Bleyseng yes Kevin, I knew it was you. Just trying to get e... Mar 25 2003, 08:50 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 05:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.