 Another Carb/Timing Question, I am really not good at this stuff |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Aug 24 2008, 05:55 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I have recently gotten my 914 up and running after a rebuild. I have been trying to work on the carbs and timing. The car runs ok but I am shooting black soot out of the exhaust and the exhaust backfires on decel. Engine idles fine. I have been reading and searching for a long time. I have read too much and I am now super confused. I keep reading that the backfiring on decel is from a lean condition and the black soot is from mixture being too rich? I am confused, can anybody help me? To confuse me more, I recently saw some white/blue smoke- I checked my compression and I am getting 150 in all cylinders.
car info -73' 1.7 liter however I now have 96mm jugs, 78.5mm stroker crank- making engine displacement just under 2.4l. -the previous owner put in a new camshaft however I do not know the details other than that it is from webcam -2.0 heads -cromoly pushrods with clearance set to 0 cold -timing set at 27 degrees at 3000 rpm -bosch 050 dizzy with pertronix -msd 6al carb info (all the jet/venturi/etc sizes were placed by the previous owner) -dual weber 40 idf's -carbs just rebuilt last week -32 main venturi's -120 main jets -f7.5 emulsion tubes -200 air correction jets I am so confused. Your help is greatly appreciated, Steve |
   |
 
|
  |
Replies
| Joe Ricard |
Aug 25 2008, 02:47 PM
Post
#2
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
What you still can't read?
You even re-posted in a quote. JETS size as in main jet size of 120 will not run a 2.0L engine. let alone a 2.4L GEEZE some people. |
|
|
|
| wertygrog |
Aug 25 2008, 10:25 PM
Post
#3
|
|
wertygrog Group: Members Posts: 429 Joined: 12-November 05 From: Long Beach, CA Member No.: 5,114 Region Association: Southern California |
QUOTE(Joe Ricard @ Aug 25 2008, 01:47 PM)  JETS size as in main jet size of 120 will not run a 2.0L engine. let alone a 2.4L GEEZE some people. Ummm...I've had 120 mains in my 2.0L weber 40 IDF's since I've owned the car. It is too lean and I have bigger jets on the way, but it sure as heck runs! GEEZE some people. (IMG:style_emoticons/default/biggrin.gif) |
|
|
|
| r_towle |
Aug 25 2008, 10:28 PM
Post
#4
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
QUOTE(wertygrog @ Aug 26 2008, 12:25 AM) QUOTE(Joe Ricard @ Aug 25 2008, 01:47 PM) JETS size as in main jet size of 120 will not run a 2.0L engine. let alone a 2.4L GEEZE some people. Ummm...I've had 120 mains in my 2.0L weber 40 IDF's since I've owned the car. It is too lean and I have bigger jets on the way, but it sure as heck runs! GEEZE some people. (IMG:style_emoticons/default/biggrin.gif) Brent, You still up here? PM me about this weekend and the guy you got the motor from. Rich |
|
|
|
Posts in this topic
tornik550 Another Carb/Timing Question Aug 24 2008, 05:55 PM
r_towle Well, you probably have two issues.
Backfiring ou... Aug 24 2008, 06:08 PM tornik550 I will look for the exhaust leak. Any good ideas ... Aug 24 2008, 06:33 PM SirAndy
I am so confused.
Like rich said, backfire throug... Aug 24 2008, 07:08 PM r_towle to find the leak put a 2*4 over the exhit tailpipe... Aug 24 2008, 07:12 PM tornik550 it appears that my idle jets are 50 Aug 24 2008, 07:48 PM r_towle I would say first fix the exhaust leak.
I had 40m... Aug 24 2008, 08:00 PM 904svo With the Weber 40's , I would suggest you chan... Aug 24 2008, 08:11 PM tornik550 where can you get 38mm vents for a 40idf? i just ... Aug 24 2008, 08:54 PM Joe Ricard 1st of all NEVER trust what the internet Yahoos sa... Aug 24 2008, 09:20 PM
roadster fan
1st of all NEVER trust what the internet Yahoos s... Aug 25 2008, 01:06 PM
r_towle
Now it really doesn't matter what is stamped ... Aug 25 2008, 02:32 PM r_towle Make sure you listen to Joe, he knows everything.
... Aug 24 2008, 09:33 PM Joe Ricard See at least Rich knows who's the "Mac Da... Aug 25 2008, 07:27 AM r_towle I know you like picking a fight, but read what I w... Aug 25 2008, 03:34 PM Joe Ricard That would be one heck of a starter to spin a moto... Aug 25 2008, 09:16 PM SGB It has been a long time, but I thought (ouch) that... Aug 25 2008, 10:40 PM Joe Ricard Yea I have had a 2.0L engine for many years. Low ... Aug 26 2008, 06:20 AM r_towle I guess after rebuilding three motors you are the ... Aug 26 2008, 08:16 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th July 2025 - 03:29 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.