![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
bfrymire |
![]()
Post
#1
|
Salsaholic ![]() ![]() ![]() Group: Members Posts: 590 Joined: 1-August 04 From: Sunnyvale, CA Member No.: 2,431 Region Association: Northern California ![]() |
![]() I have a 914-6 conversion that I bought from someone. Well, looking at the rear trans mount, it's off the posts. This does not look right. Any ideas of whta is wrong and what I need to do to correct. (this does not look safe.) The engine appears to be mounted in the correct place and everything else looks ok. I am thinking that the rear mount is the wrong one??? Here's a pic. I really hope someone can point me in the right direction. -- brett |
![]() ![]() |
Root_Werks |
![]()
Post
#2
|
Village Idiot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,337 Joined: 25-May 04 From: About 5NM from Canada Member No.: 2,105 Region Association: Pacific Northwest ![]() ![]() |
Rich mentioned something important. If someone just straightened the shift bar it'll be too long. Someone might have shifted the engine back to make the shifting work? Hard to say. You can measure the shift bar for us and we'll tell you if it's too long or not.
|
bfrymire |
![]()
Post
#3
|
Salsaholic ![]() ![]() ![]() Group: Members Posts: 590 Joined: 1-August 04 From: Sunnyvale, CA Member No.: 2,431 Region Association: Northern California ![]() |
Rich mentioned something important. If someone just straightened the shift bar it'll be too long. Someone might have shifted the engine back to make the shifting work? Hard to say. You can measure the shift bar for us and we'll tell you if it's too long or not. Finally got back to working it. Ok. I looked at the rear mounts, and they were not symetrical. So, I rotated them, and it's a little better. Hum. So, I crawled to the front of the engine, and the motor is all the way forward on the cradle, and the cradle can only go one way, and it's mount directly on the cradle mounts on the frame. Still nothing that looks amiss. I did check the shift rod, and it's been cut and respliced together. So, I am wondering if this is a homemade engine cradle, and was built wrong. Anyone point me to somewhere that there is a picture of a correct one? I am still puzzled as I can't see anywhere that the engine can move forward anymore. Thoughts anyone? -- brett |
SirAndy |
![]()
Post
#4
|
Resident German ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 41,680 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California ![]() |
So, I am wondering if this is a homemade engine cradle, and was built wrong. Anyone point me to somewhere that there is a picture of a correct one? How about a picture of yours? (IMG:style_emoticons/default/idea.gif) Andy |
bfrymire |
![]()
Post
#5
|
Salsaholic ![]() ![]() ![]() Group: Members Posts: 590 Joined: 1-August 04 From: Sunnyvale, CA Member No.: 2,431 Region Association: Northern California ![]() |
So, I am wondering if this is a homemade engine cradle, and was built wrong. Anyone point me to somewhere that there is a picture of a correct one? How about a picture of yours? (IMG:style_emoticons/default/idea.gif) Andy That's going to be next. I am on my way to somewhere that I have to be presentable. (IMG:style_emoticons/default/smile.gif) So, later, when I can afford to be dirty, I will crawl under and take another picture. -- brett |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 10th June 2024 - 05:02 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |