The dreaded knock. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
The dreaded knock. |
atmadsen914 |
Dec 28 2008, 11:06 PM
Post
#1
|
Am I sure I like old cars? Group: Members Posts: 45 Joined: 7-September 07 From: Carlinville IL Member No.: 8,087 Region Association: Upper MidWest |
I recently rebuilt a 2.0/4 motor and installed it in my 914. After getting many fuel system issues sorted out I finally was able to drive it a few times but after about 150 miles of driving. It developed a knock. I readjusted the valves and the knock seems to get better but never goes away. The knock is audible from idle to about 1500 rpm then smoothes out. When I roll the motor over by hand I can hear a knock on every cylinder.
The motor is basically stock with the exception of a web cam (73 grind). I am about to pull the motor and start disassembling as the sound does not seem good. However after many hours of tinkering has not gotten worse. Ideas? or do I just get to do it all over again? |
Jake Raby |
Dec 29 2008, 09:50 AM
Post
#2
|
Engine Surgeon Group: Members Posts: 9,394 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
Sounds like a worn lifter bore... OR the camshaft thrust bearings are zapped.
Or a couple hundred other possibilities. Get a video of the sounds and post it, I can probably diagnose over the net. |
Lo-Fi Version | Time is now: 11th June 2024 - 03:44 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |