The dreaded knock. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
The dreaded knock. |
atmadsen914 |
Dec 28 2008, 11:06 PM
Post
#1
|
Am I sure I like old cars? Group: Members Posts: 45 Joined: 7-September 07 From: Carlinville IL Member No.: 8,087 Region Association: Upper MidWest |
I recently rebuilt a 2.0/4 motor and installed it in my 914. After getting many fuel system issues sorted out I finally was able to drive it a few times but after about 150 miles of driving. It developed a knock. I readjusted the valves and the knock seems to get better but never goes away. The knock is audible from idle to about 1500 rpm then smoothes out. When I roll the motor over by hand I can hear a knock on every cylinder.
The motor is basically stock with the exception of a web cam (73 grind). I am about to pull the motor and start disassembling as the sound does not seem good. However after many hours of tinkering has not gotten worse. Ideas? or do I just get to do it all over again? |
Mark Henry |
Dec 30 2008, 04:36 PM
Post
#2
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
What was the end play?
Keep rolling it over as you take it out and tear into it, just in case you get lucky. |
atmadsen914 |
Dec 30 2008, 04:49 PM
Post
#3
|
Am I sure I like old cars? Group: Members Posts: 45 Joined: 7-September 07 From: Carlinville IL Member No.: 8,087 Region Association: Upper MidWest |
What was the end play? Keep rolling it over as you take it out and tear into it, just in case you get lucky. My current theory is actually endplay. I fear the flywheel bolts have loosened. (I was not the one who installed them). As the sound seems to be very similar to when you roll the motor over on the bench without the fly wheel attached. I have no play however on the front side but it is difficult to test with the motor in the car. Just a theory at this point. |
Lo-Fi Version | Time is now: 2nd June 2024 - 11:17 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |