 Bleeding Brakes - Can't Get Any Pedal Pressure |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ThinAir |
 Mar 19 2009, 07:06 PM
Post
#1
|
|
Best friends  Group: Members Posts: 2,569 Joined: 4-February 03 From: Flagstaff, AZ Member No.: 231 Region Association: Southwest Region 
 |
Well, I've searched, but there are so many responses about bleeding brakes that it's almost impossible to sort through them... so I'll ask.
I replaced the front calipers on the '70 with a pair of those pretty ones from Eric. When I put the car up on stands for the job I had good brake pedal pressure. Now that the new calipers are installed and the lines reconnected I've bled the brakes. I blocked the reservoir vent. I use a Motive Power Bleeder. I'm sure that I'm not getting any air out of the bleeders at the wheels, yet I have no resistance when I press the brake pedal - it just goes straight to the bottom. It seems unlikely that the MC would go so suddenly, so I'm wondering what else it could be. As always, this is work that is being done last minute to get my son's car ready for this weekend's Route 66 Ramble. Despite lots of trying, things never seem to get done well ahead of time! |
   |
 
|
  |
Replies
| roadster fan |
Mar 20 2009, 01:33 AM
Post
#2
|
|
Project Frankenstein !!!!!!!! Group: Members Posts: 1,009 Joined: 24-November 05 From: Aptos, CA Member No.: 5,184 Region Association: Northern California |
I have used the Motive power bleeder with good success. Yeah it may have saved my marriage (IMG:style_emoticons/default/biggrin.gif)
This is one of those jobs that there are alot of variables and differences from one car to the next. Be patient and follow the guidelines. Start at the caliper farthest away and work your way back to the MC. I would definitely bleed the MC before starting the calipers though. I have heard that the Proportioning valve can hold alot of air, thats is why I have a brass T, but I am sure Shea will chime in and tell us why that is not the best idea (IMG:style_emoticons/default/smile.gif) Jim |
|
|
|
Posts in this topic
ThinAir Bleeding Brakes - Can't Get Any Pedal Pressure Mar 19 2009, 07:06 PM
davesprinkle
Well, I've searched, but there are so many re... Mar 19 2009, 07:43 PM
ThinAir
You've still got air in the master cylinder. ... Mar 19 2009, 11:03 PM davesprinkle
You've still got air in the master cylinder.... Mar 19 2009, 11:32 PM ThinAir
B-- it'll save your marriage.
Gee... that... Mar 19 2009, 11:59 PM Heeltoe914 :agree: : But also make sure you only go about 3... Mar 19 2009, 08:09 PM type2man Yep, try not to push the pedal all the way down, b... Mar 19 2009, 08:15 PM mikez Bleed, bleed, bleed....then sometimes you wait a d... Mar 19 2009, 08:48 PM 6freak I prefer the two man way....
REALLY so the truth ... Oct 21 2009, 03:33 PM underthetire Believe it or not, you can actually open all the b... Mar 19 2009, 09:34 PM echocanyons Are the bleeders up? Mar 19 2009, 09:57 PM Dave_Darling Bleed the rear brakes first. You'd be amazed ... Mar 19 2009, 10:22 PM Sleepin Looks like that might be what I have to try.
I j... Mar 20 2009, 01:23 AM ThinAir
I would definitely bleed the MC before starting t... Mar 20 2009, 07:34 AM davesprinkle
I would definitely bleed the MC before starting ... Mar 20 2009, 09:16 AM SLITS Ernie .... crack the fittings at the MC and let it... Mar 20 2009, 09:12 AM 6freak [ This fills the MC if somehow you ran it out of ... Mar 20 2009, 11:24 AM ThinAir Well, things have not gone well. Here's what ... Mar 20 2009, 07:41 PM Cire
Well, things have not gone well. Here's what... Oct 16 2009, 10:21 PM Heeltoe914 Just replace it and consider it a upgrade? But d... Mar 20 2009, 08:12 PM McMark I've definitely had MC seals suddenly fail. I... Mar 21 2009, 08:03 PM PRS914-6 I have had great success with the Motive system. ... Mar 21 2009, 11:21 PM Vacca Rabite Couple things to check.
1) when you are bleeding,... Oct 18 2009, 12:08 AM 9146986 Did you install the calipers on the wrong sides? ... Oct 18 2009, 08:46 AM tod914 Maybe jack up the passanger rear, tap the caliper ... Oct 18 2009, 08:55 AM SLITS I vaguely remember a parallel story where the cali... Oct 18 2009, 09:17 AM pcar9146guy This thread started in March of this year.....Hope... Oct 18 2009, 02:40 PM Sleepin Yes, this has been corrected and are working wonde... Oct 18 2009, 04:14 PM Krank The first thing I always do when doing hydraulic b... Oct 23 2009, 07:38 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th November 2025 - 03:13 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.