 No spark?, not sure what to check |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| biosurfer1 |
 Apr 27 2009, 10:49 PM
Post
#1
|
|
Teener fo Life!  Group: Members Posts: 3,020 Joined: 3-August 03 From: Roseville, CA Member No.: 977 Region Association: Northern California  |
I tried to get my new engine going for a couple hours tonight and it just cranks, no fire.
Got fuel to the carbs, but no spark at the plugs (IMG:style_emoticons/default/sad.gif) Checked the coil and I get 12V off each side to ground, is this correct? What is next in the diagnosis...what else can I check? |
   |
 
|
  |
Replies
| r_towle |
May 3 2009, 10:39 AM
Post
#2
|
|
Custom Member Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
Hi,
Replace the points. They are plated and once they have pitting, they are pretty much done and will never stay clean. New points cost $4.00 Go get some....get two sets so you always have a new set on hand. Rich |
|
|
|
Posts in this topic
biosurfer1 No spark? Apr 27 2009, 10:49 PM
yeahmag That isn't right... Are you running points? Apr 27 2009, 11:09 PM Dr. Roger pos + on the coil should read about 12V. the neg ... Apr 27 2009, 11:50 PM Dave_Darling Unplug the black/purple (thinner) wire from the co... Apr 28 2009, 12:17 AM kwales If you have the stock system, remove the distribut... Apr 28 2009, 07:49 AM computers4kids Brett,
besides the comments about wiring...have so... Apr 28 2009, 08:03 AM biosurfer1 Thanks for the replies...I'll start the proces... Apr 28 2009, 08:59 AM biosurfer1 I'm still waiting for some help to arrive to h... Apr 28 2009, 08:38 PM
ArtechnikA
...shouldn't I only get 12V off the + side?
... Apr 28 2009, 08:41 PM biosurfer1 Still coming up with nothing...
I don't have ... Apr 29 2009, 10:28 PM Dave_Darling Unplug the points wire at the distributor. Now ch... Apr 30 2009, 08:49 AM biosurfer1 Thanks Dave...I'll try that tonight Apr 30 2009, 08:54 AM biosurfer1 well I got it figured out...thanks to Justin looki... May 2 2009, 10:01 PM computers4kids
well I got it figured out...thanks to Justin look... May 3 2009, 08:53 AM biosurfer1 Already one step ahead of you Rich... already orde... May 3 2009, 07:27 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 02:32 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.