 Price check. How much for M caliper + e-brake conv. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Richard Casto |
 May 16 2009, 10:44 PM
Post
#1
|
|
Blue Sky Motorsports, LLC  Group: Members Posts: 1,465 Joined: 2-August 05 From: Durham, NC Member No.: 4,523 Region Association: South East States  |
I am trying to determine what fair market value for the following is…
* Pair of used rear 911 M-calipers. Is there a price difference for the early (with knock-back) and later (no knock-back and cup pistons)? * Pair of used parking brake backing plates and associated hardware from a 70-73 911. I believe the 70-73 is the proper year range so that the mounting holes match the 914 trailing arm. Condition? I am looking for working, but ready for rebuild/refresh. Basically what you might find if pulled from a running but tired 911. As you can guess, I am looking to do an M caliper and 911 e-brake conversion on the rear of my car. I already have sourced A-calipers for the front. |
   |
 
|
  |
Replies
| Richard Casto |
May 18 2009, 07:25 PM
Post
#2
|
|
Blue Sky Motorsports, LLC Group: Members Posts: 1,465 Joined: 2-August 05 From: Durham, NC Member No.: 4,523 Region Association: South East States |
Wes,
Thanks for the info (particularly the part number for the o-rings). Regrading the angle pull, I haven't seen a complete setup with that, but I know a few people are trying to make it work. It looks like I will be one of them. But... if it doesn't work, there is plenty of other solutions using the 911 bowtie spreader that does work. Since posting the questions above, I have talked to a local guy who parts out 911s and it sounds like he has a pair of the rear m-calipers for me. But he didn't have the parking brake assembly in the year range I am looking for. So I am officially looking for that now as well as a few other things. Richard |
|
|
|
Posts in this topic
Richard Casto Price check. How much for M caliper + e-brake conv. May 16 2009, 10:44 PM
914Sixer You did not say if you are going with vented rotor... May 17 2009, 06:38 AM Richard Casto Vented rear. Basically the caliper/rotor combo us... May 17 2009, 07:29 AM Phoenix 914-6GT Call Eric Shea and he will give you the figures yo... May 17 2009, 08:27 PM charliew I have some m calipers I got from 914sixer awhile ... May 17 2009, 10:45 PM Richard Casto I am going to probably do the 924/944 angle/side p... May 18 2009, 06:49 AM
tomeric914
So if anyone can offer any help on typical prices... May 18 2009, 08:39 AM charliew If you go to the center a one to two cable off a 9... May 18 2009, 09:08 AM Richard Casto Thanks everyone for your help. I also talked to E... May 18 2009, 12:26 PM Wes V Richard;
Here are my two cents;
It's not re... May 18 2009, 05:41 PM charliew One of the places I got the 944 shoes, hardware an... May 18 2009, 10:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 12th July 2025 - 04:00 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.