 Dwell increasing with RPMs |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ferg |
 Aug 24 2009, 11:37 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 5,948 Joined: 8-January 03 From: Boulder CO Member No.: 116 Region Association: None 
 |
Dwell is 49 at idle, jumps to 50 just off idle and goes all the way to 53 at full advance (3500 rpms), advance and retard hoses were hooked up for dwell check, I know to unhook them for timing. Is that right, or do I need to unhook them for dwell, as well.
Possible dizzy advacing plate issue? Car has a miss at 3kish, I'm trying to squash. Stock 74 2.0 djet. timing is set at 29. |
   |
 
|
  |
Replies
| JoeSharp |
Aug 25 2009, 09:41 AM
Post
#2
|
|
In Irvine, Ca. May 15-18 Group: Members Posts: 3,947 Joined: 9-July 03 From: DeLand, Florida Member No.: 898 Region Association: South East States |
Hey Mikie, put some 30 weight on all the stuff below the points and grease the points. The oil is to see if it helps with the woble of the shaft and the grease is to keep the points from bouncing. If the shaft wobles less then get a new dist. Weather or not the points are bouncing replace them with something electronic.
|
|
|
|
Posts in this topic
Ferg Dwell increasing with RPMs Aug 24 2009, 11:37 PM
brant thats weird
I'll let the experts jump in
but ... Aug 24 2009, 11:45 PM Ferg Yes, strange indeed.
I did check gap again, seems... Aug 24 2009, 11:56 PM SLITS The points are a spring. If you activate the spri... Aug 25 2009, 08:40 AM
ME733
The points are a spring. If you activate the spr... Aug 25 2009, 08:56 AM jaxdream I've heard of circle track racers that run a M... Aug 25 2009, 09:06 AM Ferg These are brand new points (second set) and new co... Aug 25 2009, 09:10 AM Cap'n Krusty Worn out breaker plate. The condenser, BTW, canno... Aug 25 2009, 09:22 AM Ferg
Worn out breaker plate. The condenser, BTW, cann... Aug 25 2009, 09:28 AM ME733
Worn out breaker plate. The condenser, BTW, cann... Aug 25 2009, 06:45 PM McMark Cap'n, what wears out on the breaker plate? D... Aug 25 2009, 03:25 PM Ferg reset the dwell to 45 tonight, and retimed it to 2... Aug 25 2009, 09:36 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 02:38 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.