 Bump Steer, How to tell...? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim_hoyland |
 Aug 26 2009, 05:48 PM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,698 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
Is the test for bump steer driving over a speed bump straight on or at an angle. I don't get any noticable pulling when taking the speed bump straight on. Just want to get the test situation straight, any input will be appreciated.
Car is lowered about 50% |
   |
 
|
  |
Replies
| J P Stein |
Aug 27 2009, 06:33 PM
Post
#2
|
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Angles..we gots em and it works. I'm at 4-3/4 inches at the doughnuts. I was lower but had wheel to A arm interference at a lot of steering lock & suspension compression..so back up we went.....who'da thunk it.....
Jim: With raised spindles it takes either bending the steering arm.....which buggers up the Ackerman or tie rod extensions....these are by ERP. It can run into money to get both. Attached thumbnail(s) 
|
|
|
|
| SirAndy |
Aug 27 2009, 06:40 PM
Post
#3
|
|
Resident German Group: Admin Posts: 42,207 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
QUOTE(J P Stein @ Aug 27 2009, 04:33 PM)  Angles..we gots em and it works. Yeah, but your overall suspension travel is what, a micrometer? (IMG:style_emoticons/default/rolleyes.gif) On a mostly stock suspension, with lots of travel, the more unparallel the arm is in regards to the tie rod the worser the bumpness steering gets ... (IMG:style_emoticons/default/stirthepot.gif) Andy |
 |
|
Posts in this topic
jim_hoyland Bump Steer Aug 26 2009, 05:48 PM
ConeDodger Jim,
I have never heard of a test for bump steer b... Aug 26 2009, 07:20 PM underthetire If you get a "that feels kinda funny" ma... Aug 26 2009, 09:05 PM r_towle Jim,
Take a pic of your car, on the ground.
Lay do... Aug 26 2009, 09:10 PM
jim_hoyland
Jim,
Take a pic of your car, on the ground.
Lay d... Aug 26 2009, 09:13 PM
orange914
Post that so we can see the whole a-arm.
RIch
l... Aug 26 2009, 09:20 PM orange914
Is the test for bump steer driving over a speed b... Aug 26 2009, 09:14 PM jim_hoyland Pics: Aug 26 2009, 09:27 PM r_towle your fine.
I will never suggest to anyone to put ... Aug 26 2009, 09:38 PM jim_hoyland
your fine.
I will never suggest to anyone to put... Aug 26 2009, 09:40 PM ArtechnikA
It binds things in other places...namely the uppe... Aug 27 2009, 07:54 PM jaxdream
It binds things in other places...namely the upp... Aug 27 2009, 08:37 PM stewteral
Is the test for bump steer driving over a speed b... Aug 26 2009, 09:55 PM J P Stein
I hope all my work can help you understand what... Aug 27 2009, 03:17 PM turboman808 Wouldn't you idealy like the tie rod to be par... Aug 26 2009, 10:13 PM orange914 i really don't have real world experiance with... Aug 26 2009, 10:17 PM orange914 looking at the picture and reading rich's comm... Aug 26 2009, 10:35 PM r_towle
looking at the picture and reading rich's com... Aug 26 2009, 10:39 PM SirAndy
Tie rods always need to be at an angle
:confused... Aug 26 2009, 10:47 PM orange914
Tie rods always need to be at an angle
:confuse... Aug 26 2009, 11:14 PM jmill There is a bump steer test. It's alot easier ... Aug 27 2009, 08:16 AM jim_hoyland Thanks Terry-That is a good explanation. Am I corr... Aug 27 2009, 08:25 AM Cevan From my own experience, my car had pretty signific... Aug 27 2009, 10:17 AM gopack Elephant racing makes the tie rod end solution. L... Aug 27 2009, 12:57 PM SirAndy
Elephant racing makes the tie rod end solution.
... Aug 27 2009, 01:01 PM turboman808 I really thought my car had this and just needed s... Aug 27 2009, 01:28 PM jim_hoyland Does raising the spindles or using the ER bump ste... Aug 27 2009, 02:59 PM SirAndy
Does raising the spindles or using the ER bump st... Aug 27 2009, 03:02 PM turboman808
Does raising the spindles or using the ER bump st... Aug 27 2009, 03:13 PM J P Stein I have 2 1/2 inches of front shock travel & us... Aug 27 2009, 06:55 PM cwpeden You need to account for the pivot points of the ti... Aug 27 2009, 07:10 PM J P Stein
You need to account for the pivot points of the t... Aug 27 2009, 07:20 PM dw914er This is what is on clubrsx from my searches while ... Aug 27 2009, 08:58 PM jim_hoyland
This is what is on clubrsx from my searches while... Aug 27 2009, 09:48 PM dw914er Then that's probably why...
when you drop a c... Aug 28 2009, 12:33 AM SLITS HP Books - "How to Make Your Car Handle... Aug 28 2009, 08:17 AM jmill I like "Tune to Win" and "Engineer ... Aug 28 2009, 09:58 AM turboman808 Wrote this long thing and then just made a diagram... Aug 28 2009, 10:46 AM jim_hoyland
Wrote this long thing and then just made a diagra... Aug 28 2009, 11:23 AM turboman808 Well keep in mind I haven't got a clue what I ... Aug 28 2009, 12:18 PM Borderline
Well keep in mind I haven't got a clue what I... Aug 28 2009, 02:52 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 02:43 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.