Weber Carbs, Converting a '73 914-4 2L FI to Carbs Options

[velum]

Hi!

I took the decision to convert my '73 914-4 2L FI to Carburetors. My MPS is broken, new ones are not available anymore and from what I read, rebuilds are not as good as original ones. Moreover, rebuilds are not cheap either, and other parts of my 914 fuel injection system are bound to fail in the near future. Many of these parts are no longer available or are very expensive. Hence my decision.

Now, my question: Which carbs? I think I will go with Weber carburetors. I know that some people prefer Dellorto, but they are hard to find and you cannot buy them new. Plus, they are a bit expensive. I am not racing with my car. I am mainly using it to go to the country side during the weekends. So, I am not looking for performance parts. I am just looking for something with which my car will run fine, and economically.

I was hesitating between these two models:

http://www.webercarbsdirect.com/ProductDet...97&CartID=2
http://www.webercarbsdirect.com/product_p/wk412.htm

But Webcarbsdirect does not ship to Canada, and am in Montréal. However, I found similar parts at Carbs Unlimited:

http://www.carburetion.com/weber/Dataresul...912%20,%20914-4
http://www.carburetion.com/weber/Dataresul...912%20,%20914-4

The K297 would be easier to maintain. However, someone told me that a 2L 914 won't run very well with them. That the gas will mix with the oil. I did not understand the whole explaination. I am not sure if this is true. The K1412 would give better performance, but they are a bit more trouble to adjust and have no choke.

Is any one using these carbs on a 2L 914?

Cheers!

JF

[RohJay]

I use Weber 40's on my 1.8.
You might be cheating yourself by using 34's on a 2.0 ...

perhaps you should consider this set of Weber 40's in the classifieds:

http://www.914world.com/bbs2/index.php?showtopic=99250

( absolutely no connection to me :-) )