Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> AAR Question, Can it be removed?
flat4tom
post Mar 8 2010, 11:54 AM
Post #1


Member
**

Group: Members
Posts: 51
Joined: 6-January 10
From: Shingletown CA
Member No.: 11,207
Region Association: Northern California



Hello everyone,

In going over my car's vacuum lines - waiting for my fuel injectors to be returned from servicing - I decided to replace the hose from the AAR valve to the cold start valve. Then I started to think - a dangerous thing - why do I need the AAR if the cold start valve is disconnected? It currently has no fuel supply so it's not working.

Currently my AAR is stuck open. Should I try to free it and reinstall it, or can I just plug the hose to the cold start valve and not bother putting it back?

Before I pulled the injectors for service, when my car was running (I am getting this car running again from a 3 year sleep) it had a way high idle ~ 1400rpms - so there's undoubtedly vacuum leak(s) somewhere.

Any input is welcome.
Thanks!
Tom
'73 2.0
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
McMark
post Mar 8 2010, 12:43 PM
Post #2


914 Freak!
***************

Group: Retired Admin
Posts: 20,179
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None



The AAR keeps your idle up while the car is warming up. It's worth taking the time to fix it. It has nothing to do with the cold start valve. And further, the cold start valve only fires under the following conditions:

The 'engine temperature'* is below 95 degrees and ONLY while the motor is cranking and ONLY for 5-12 seconds (depending on the number of degrees below 95).

*-Engine temperature is measured by the thermotime switch, which is mounted under the main plenum. It's not oil temp and it's not CHT.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 10th June 2024 - 10:18 PM