 First Post: Advise for purchase of 914 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| FREQUENCY 24.7 |
 May 13 2010, 12:22 PM
Post
#1
|
|
Newbie  Group: Members Posts: 5 Joined: 13-May 10 From: ny Member No.: 11,725 Region Association: None  |
This is my first post. I have come across a 914 and was wondering what you all thought about it. I had a 78 924 when I was younger and have always wanted another Porsche. Its a 74 1.8 914 and the body is straight and clean, the original paint looks very good with very minor blemishes. Interior is fully intact with driver seat side bolster tears, but all else is really good, just dirty. Headlight motors work great, very minimal rust under the bonnets. The hell hole is great and very minimal rust. Exhaust and heat exchange is intact and engine will even run... well, idol. It was fitted with webber carbs instead of the injection system and when gassed it dies... main jets? Anyway, original steel wheels, tranny shifts fine, clutch is good, brakes are fair, tires are decent enough for now and the suspension is tight. Clean title, asking price is $1500. Any thoughts, fears, suggestions, things to ask or take into consideration?
|
   |
 
|
  |
Replies
| FREQUENCY 24.7 |
May 13 2010, 03:50 PM
Post
#2
|
|
Newbie Group: Members Posts: 5 Joined: 13-May 10 From: ny Member No.: 11,725 Region Association: None |
Good stuff. Im happy to get some truthful responses, it is sometimes tough to see past her sexy lines!
Im going to go back out and take more pics, pick around and see what i can see. Having second thoughts now. its a really tough decision because its a low price, but if the damage is that extensive, it wont matter how cheap it is. |
|
|
|
Posts in this topic
FREQUENCY 24.7 First Post: Advise for purchase of 914 May 13 2010, 12:22 PM
Spoke Look for rust, then look for rust, then look for r... May 13 2010, 12:25 PM 6freak first and formost :wttc: you have come to the rig... May 13 2010, 12:32 PM rwilner Just my two cents, but for $1500, it seems li... May 13 2010, 12:41 PM tat2dphreak you are doing the right thing to research before b... May 13 2010, 12:44 PM FREQUENCY 24.7 Thanks guys for the help. True, I dont know if it ... May 13 2010, 01:07 PM dr914@autoatlanta.com can't go wrong. The car is worth two grand for... May 13 2010, 01:13 PM flipb Looks like it was converted to "Carb", n... May 13 2010, 01:18 PM markb :wttc:
I agree that it looks like a good deal, bu... May 13 2010, 01:22 PM FREQUENCY 24.7 Awesome guys, thanks. I have the door handles and ... May 13 2010, 01:29 PM pete-stevers did no one see the hel hole pic? i thought this is... May 13 2010, 01:48 PM charliew I think I see a crack in the driver rear quarter b... May 13 2010, 01:50 PM Root_Werks I agree with Steve, if this isn't a parts car,... May 13 2010, 01:51 PM
rwilner how long has it been parked on the grass like that... May 13 2010, 02:03 PM mk114 I say look really close the Place just below the B... May 13 2010, 01:54 PM bandjoey DANGER WILL ROBINSON. My car had a minor leak at ... May 13 2010, 02:26 PM tat2dphreak
:agree: BTDT May 13 2010, 03:51 PM Ferg Is that water puddled left of clutch?? Drivers do... May 13 2010, 03:55 PM tat2dphreak
good eye, things aren't lining up right, ther... May 13 2010, 05:43 PM ArtechnikA If that's original paint it's the only ori... May 13 2010, 05:57 PM FREQUENCY 24.7 True, Im getting the feeling this might be one to ... May 13 2010, 06:17 PM Tom Yep, that driver's door gap looks suspect. And... May 13 2010, 06:21 PM rick 918-S :wttc: May 13 2010, 09:33 PM 6freak Appears to be loaded with rust...IMO if you wanted... May 14 2010, 07:29 AM Spoke
asking price is $1500. Any thoughts, fears, ... May 14 2010, 08:10 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st July 2025 - 09:44 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.