Hazard button wiring question |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Hazard button wiring question |
project-914 |
Jul 3 2010, 02:53 PM
Post
#1
|
Member Group: Members Posts: 181 Joined: 2-August 06 From: Oklahoma Member No.: 6,571 |
My button isn't what it should be for a 1973 US spec and I want to know if they are interchangeable
top to bottom and left to right I have +, 15, 30...then 54f, 58b, 49a...then two unlabeled ones the "15" and "+" are confusing... the pin to "54f" is absent there is a resistor between "58b" and the switch contact if it were to be pried apart both unlabeled switches I assume to be the "L" and "R" in the haynes diagram and that it doesn't matter which is which any advice? |
Spoke |
Jul 4 2010, 11:28 AM
Post
#2
|
Jerry Group: Members Posts: 6,991 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None |
58b is for the illumination light on the switch. It connects to the other dash lights so at night the hazard switch is dimly lit up.
Below is the simplified schematic of the hazard switch. My schematics do not show a "+" or 54f pin. Attached image(s) |
Lo-Fi Version | Time is now: 9th June 2024 - 03:36 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |