 Spring in the distrib drive, Needed? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jeffdon |
 Aug 18 2010, 08:21 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,094 Joined: 24-October 06 From: oakland, ca Member No.: 7,087 Region Association: None  |
Have a feeling I did not install a spring between the Distrib, and the Distrib Pinion gear/drive. Do not see it in the Raby video, but its in the factory parts schematic. I am running an 050 (i think, its not an 009) mech. adv. distrib. Do I need to put the spring in?
|
   |
 
|
  |
Replies
| charliew |
Aug 20 2010, 12:04 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,363 Joined: 31-July 07 From: Crawford, TX. Member No.: 7,958 |
You probably don't want to hear this but now that you are getting good at removing the dist. Go get a good single vaccum and mechanical advance one (SVDA single vaccum dual advance) and make your motor a lot happier. You will be able to tell the difference when you take off.
|
|
|
|
| ME733 |
Aug 20 2010, 07:55 PM
Post
#3
|
|
Senior Member Group: Members Posts: 842 Joined: 25-June 08 From: Atlanta Ga. Member No.: 9,209 Region Association: South East States |
QUOTE(charliew @ Aug 20 2010, 02:04 PM)  You probably don't want to hear this but now that you are getting good at removing the dist. Go get a good single vaccum and mechanical advance one (SVDA single vaccum dual advance) and make your motor a lot happier. You will be able to tell the difference when you take off. Charlie....you are more than correct. ,it,s the right thing to do. I just fell out making any more comments on this thread, when some of the guys , thought it would be ok to have the distributor installed 180 out of phase, and an 009 would work properly also. |
|
|
|
Posts in this topic
jeffdon Spring in the distrib drive Aug 18 2010, 08:21 AM
ME733 ..........YES ABSOLUTELY PUT THE SPRING IN........... Aug 18 2010, 08:53 AM
realred914
..........YES ABSOLUTELY PUT THE SPRING IN.......... Aug 18 2010, 09:00 AM
Mark Henry
..........YES ABSOLUTELY PUT THE SPRING IN......... Aug 18 2010, 09:04 AM jeffdon
..........YES ABSOLUTELY PUT THE SPRING IN.......... Aug 18 2010, 09:00 AM ME733
..........YES ABSOLUTELY PUT THE SPRING IN......... Aug 18 2010, 09:15 AM jeffdon
[quote name='jeffdon' post='1357769' date='Aug 18... Aug 18 2010, 09:23 AM ME733
[quote name='jeffdon' post='1357769' date='Aug 18... Aug 18 2010, 09:27 AM jeffdon
..................Oh Dear God, protect this poor ... Aug 18 2010, 09:36 AM jeffdon One more thing....i KNOW i somehow indexed the dri... Aug 18 2010, 09:11 AM realred914 yeah index it right so as to not screw up timing s... Aug 18 2010, 09:34 AM jeffdon allrighty, i can pull the dizzy up about half an i... Aug 18 2010, 10:03 AM realred914
allrighty, i can pull the dizzy up about half an ... Aug 18 2010, 10:20 AM jeffdon
allrighty, i can pull the dizzy up about half an... Aug 18 2010, 10:24 AM ME733
[quote name='realred914' post='1357814' date='Aug... Aug 18 2010, 10:52 AM Vacca Rabite Okay, a couple of things.
if you loose the spring... Aug 18 2010, 10:52 AM jeffdon
Okay, a couple of things.
if you loose the sprin... Aug 18 2010, 10:59 AM jeffdon
Okay, a couple of things.
if you loose the spri... Aug 18 2010, 11:27 AM rhcb914 Nothing is wrong with running the dizzy 180 out. ... Aug 18 2010, 12:32 PM jeffdon
Nothing is wrong with running the dizzy 180 out. ... Aug 18 2010, 03:21 PM Vacca Rabite On mine I like to gently tap on the locking collar... Aug 18 2010, 05:33 PM jeffdon
On mine I like to gently tap on the locking colla... Aug 18 2010, 09:25 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 11:36 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.