 MegaSquirt trigger wheel sensor solution, What's your design?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| draganc |
 Aug 30 2010, 11:16 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 725 Joined: 2-November 09 From: central new jersey Member No.: 11,000 Region Association: North East States  |
Hi guys!
I’m planning to upgrade my D-jet system on a 75 2.0 (2056) with a MegaSquirt system. I’m still debating how to mount the trigger-wheel-sensor and would like to see some of your solutions. Thank you for your input, Dragan |
   |
 
|
  |
Replies
| 904svo |
Aug 31 2010, 07:57 PM
Post
#2
|
|
904SVO Group: Members Posts: 1,129 Joined: 17-November 05 From: Woodstock,Georgia Member No.: 5,146 |
MS1 extra will let you change the 12x12 AFR1 tables to 24x12 ARF1 + AFR2 just by adding the second table and switching to them to switch at a set point.
|
|
|
|
| JamesM |
Sep 1 2010, 12:02 AM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,187 Joined: 6-April 06 From: Kearns, UT Member No.: 5,834 Region Association: Intermountain Region |
QUOTE(904svo @ Aug 31 2010, 05:57 PM)  MS1 extra will let you change the 12x12 AFR1 tables to 24x12 ARF1 + AFR2 just by adding the second table and switching to them to switch at a set point. Thats pretty cool, i never thought of using the dual table system in that way. So far 12x12 has done everything i have needed it to, but i might try messing around with a 24x12 table and see if i notice any difference. I do most of my tuning with megalogviewer though and i am not sure if it handles a dual table setup like that. As for the increased resolution of the MS2 i was refering more to the higher clock speed/sampleing rate of the processor itself. I am not sure if it has any noticeable effect on performance or if it just results in smoother looking log files. |
|
|
|
Posts in this topic
draganc MegaSquirt trigger wheel sensor solution Aug 30 2010, 11:16 PM
McMark My design is available here.
http://www.914world.... Aug 30 2010, 11:24 PM hcdmueller I bought the McMark trigger wheel. It fits perfec... Aug 31 2010, 01:55 AM SLKWrx I've got the same setup and the fit/finish is ... Aug 31 2010, 06:57 AM draganc I will go with Van's design (2nd pic from the ... Aug 31 2010, 07:36 AM McMark The only change in the final sensor mount is that ... Aug 31 2010, 09:58 AM
draganc
The only change in the final sensor mount is that... Aug 31 2010, 02:11 PM McMark My newest shipment of wheels is shipping right now... Aug 31 2010, 03:08 PM dr914@autoatlanta.com We took a new 009 distributor and designed a picku... Aug 31 2010, 03:20 PM draganc
We took a new 009 distributor and designed a pick... Aug 31 2010, 03:45 PM underthetire
We took a new 009 distributor and designed a pic... Aug 31 2010, 03:48 PM JamesM
Ya, inquiring minds want to know. I'd love to... Aug 31 2010, 06:11 PM JamesM I had an idea for something similar to this but un... Aug 31 2010, 06:21 PM dr914@autoatlanta.com here is a picture: Aug 31 2010, 03:55 PM JamesM
here is a picture:
I knew i had seen something ... Aug 31 2010, 08:00 PM dr914@autoatlanta.com we had all kinds of problems modifying both the fl... Aug 31 2010, 04:01 PM RJMII McMark's also turns at the rate of the crank..... Aug 31 2010, 04:01 PM dr914@autoatlanta.com
McMark's also turns at the rate of the crank.... Aug 31 2010, 04:08 PM Jake Raby I am doing some MS test work now.. I ended up usin... Aug 31 2010, 04:05 PM RJMII
I am doing some MS test work now.. I ended up usi... Aug 31 2010, 04:14 PM Jake Raby
I am doing some MS test work now.. I ended up us... Aug 31 2010, 06:52 PM 904svo
[quote name='RJMII' post='1364119' date='Aug 31 2... Aug 31 2010, 07:30 PM JamesM
[quote name='RJMII' post='1364119' date='Aug 31 2... Aug 31 2010, 07:49 PM JamesM
I am doing some MS test work now.. I ended up usi... Aug 31 2010, 06:50 PM dr914@autoatlanta.com Jake is the man for all of this stuff. I am excit... Aug 31 2010, 05:20 PM Jake Raby We haven't seen any benefits of sequential on ... Aug 31 2010, 08:02 PM JamesM
We haven't seen any benefits of sequential on... Aug 31 2010, 09:01 PM draganc I like where this discussion is heading!
Jus... Aug 31 2010, 08:46 PM Jake Raby I actually prefer the handheld programmer of SDS a... Aug 31 2010, 09:10 PM JamesM
BTW- The theory you have read concerning sequenti... Aug 31 2010, 11:07 PM DNHunt
Here are my experiences with MS failures. I had ... Sep 1 2010, 07:10 AM JamesM
Here are my experiences with MS failures. I had... Sep 1 2010, 11:42 AM Jake Raby
I'd rather take a personal injury as burn th... Sep 1 2010, 08:26 AM 904svo Here's my 36 tooth wheel design mounted with A... Sep 1 2010, 08:29 AM draganc
Here's my 36 tooth wheel design mounted with ... Sep 2 2010, 07:50 AM 904svo
Here's my 36 tooth wheel design mounted with... Sep 2 2010, 08:19 AM draganc
[quote name='draganc' post='1364931' date='Sep 2 ... Sep 2 2010, 05:12 PM 904svo
[quote name='draganc' post='1364931' date='Sep 2... Sep 3 2010, 07:52 AM draganc It's was the only way I could do when running ... Sep 3 2010, 11:41 AM Mark Henry I've only had two issues with my SDS, the firs... Sep 1 2010, 08:30 AM Jake Raby The guys at SDS don't like ITBs because they h... Sep 1 2010, 10:18 AM Jake Raby I bought as much as possible from DIYautotune, bec... Sep 1 2010, 04:19 PM charliew The db-37 connector was the main reason I put off ... Sep 1 2010, 08:30 PM JamesM Changing the db-37 out on a stock board is probabl... Sep 3 2010, 12:49 AM charliew If I changed the connector my idea was to connect ... Sep 4 2010, 08:42 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 12:37 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.