 Brakes won't retract... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| amphiduck |
 Sep 9 2010, 01:44 PM
Post
#1
|
|
Member  Group: Members Posts: 94 Joined: 29-September 06 From: Tennessee Member No.: 6,947  |
So I just put all four calipers back on my car, filled the reservoir with fluid and pumped the pedal a few times to see if there were any leaks around the pistons. The system is tight, no leaks anywhere. I started bleeding the pedals in the order given by Haynes, and now all the rotors won't spin because the pistons won't retract and the brake pedal barely moves. What gives? I feel like I'm making a novice mistake somewhere.
Thanks in advance. |
   |
 
|
  |
Replies
| amphiduck |
Sep 9 2010, 03:32 PM
Post
#2
|
|
Member Group: Members Posts: 94 Joined: 29-September 06 From: Tennessee Member No.: 6,947 |
Oh and I did not bleed the master cylinder. Not sure if that makes a difference or not.
|
|
|
|
Posts in this topic
amphiduck Brakes won't retract... Sep 9 2010, 01:44 PM
dr914@autoatlanta.com
So I just put all four calipers back on my car, f... Sep 9 2010, 02:07 PM bandjoey Front? Back? All 4? Sep 9 2010, 03:06 PM messix is the brake pedal push rod adjusted correctly, it... Sep 9 2010, 03:10 PM amphiduck All four wheels are extremely difficult to rotate ... Sep 9 2010, 03:31 PM Tom Try opening the bleed valve a small amount on one ... Sep 9 2010, 03:38 PM amphiduck Tom, Thanks for the heads up. I'll go try tha... Sep 9 2010, 03:44 PM underthetire If you were able to bleed it, doubt it's the p... Sep 9 2010, 04:36 PM amphiduck I tried opening one of the valves on the right rea... Sep 9 2010, 05:10 PM amphiduck Not sure if it matters, but the lines in rear are ... Sep 9 2010, 05:16 PM Tom With the one wheel loose and the others still tigh... Sep 9 2010, 05:24 PM bandjoey Venting Clearance on the rear too tight and missin... Sep 9 2010, 06:50 PM
Drums66
Venting Clearance on the rear too tight and missi... Sep 10 2010, 11:14 AM amphiduck Well tonight I put new brake hoses on, hoping that... Sep 9 2010, 10:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2026 - 03:44 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.